High-quality intake manifold from the Polini quality brand to fit the 47 mm Gilardoni italkit racing kit for various Puch mopeds.
All Dell'Orto PHBG DS carburetors can be fitted to this intake manifold.
The plastic carburetor connection can be rotated 360°. This means that the carburetor can be mounted without any problems even in tight spaces.
Hole pattern: 37 x 60 mm
Inclination angle: 20°
Ø carburetor connection: 35 mm
Passage: 30 mm
Matching attachments can be found in the accessories section.
Quality product from the Italian manufacturer Polini.
| Manufacturer | Polini |
| Material | Aluminum, Rubber |
| Ø inside | 30 mm |
| Mounting type | Screws |
| Ø External connection | 35 mm |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 60 x 35 |
| Area of application | Tuning |
| Puch |
Ratings
Accessories & related products
Stage6 8-folding diaphragm by Moto Tassinari (Gilardoni italkit)
Manufacturer: Stage6 · Material: Plastic · Surface: raw · Mounting type: Screws · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.4 mm · Total length: 77 mm · Number of fixing points: 4 pcs · Area of application: High End · Ø mounting hole: 6.6 mm · Width: 49 mm · Hole pattern [mm]: 60 x 35 mm
EUR 142.40
Dell'Orto 21 mm PHBG DS carburetor cable choke - Red Edition
Nominal diameter: 21 mm · Manufacturer: Dell'Orto · Width: 85 mm · Height: 130 mm · Component group Carburetor: Carburetor complete · Surface: varnished · Area of application: Tuning · Carburetor type: PHBG DS · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 92 · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: Yes · Mounting type: Plug connection · Choke nozzle size: 60 · Size of secondary nozzle: 50
EUR 185.70
Dell'Orto 19 mm PHBG DS carburetor cable choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Width: 90 mm · Height: 130 mm · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: PHBG DS · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 75 · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: Yes · Mounting type: Plug connection · Choke nozzle size: 60 · Size of secondary nozzle: 45
EUR 161.00
Malossi reed valve carbonite 0.3 / 0.35 / 0.4 mm VL6 Gilardoni italkit
Manufacturer: Malossi · Area of application: Tuning · Number of flaps: 4 pcs · Total length: 37 mm · Membrane material: Carbonite · Width: 42 mm · Thick membrane platelets: 0.3 mm · Thick membrane platelets: 0.35 mm · Thick membrane platelets: 0.4 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Hole spacing: 22 mm
EUR 37.10
Not in stock
Malossi reed valve carbon 0.3 / 0.35 / 0.4 mm VL6 Gilardoni italkit
Manufacturer: Malossi · Area of application: Tuning · Number of flaps: 4 pcs · Total length: 37 mm · Membrane material: Carbon · Width: 42 mm · Thick membrane platelets: 0.3 mm · Thick membrane platelets: 0.35 mm · Thick membrane platelets: 0.4 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Hole spacing: 22 mm
EUR 43.20
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Color: gray · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.50
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Number of teeth: 45 pcs · Ø inside: 94 mm · Thickness: 4.5 mm · Chain pitch: 1/2" x 3/16" · Color: black · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Number of fixing points: 6 pcs · Cranking (offset): 8 mm
EUR 24.70
GPO Leaf gauge set 0.05 - 1.00 13 pcs.
Measuring range: 0.05 - 1 mm · Manufacturer: GPO · Material: Metal · Surface: blank / oiled · Total length: 105 mm · Thickness: 0.05 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 0.6 mm · Thickness: 0.7 mm · Thickness: 0.8 mm · Thickness: 0.9 mm · Thickness: 1 mm · Area of application: Measuring tool · Width: 13 mm · Number of components: 13 pcs
EUR 14.80
swiing® revival oil filler plug with sealing ring | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 14.6 mm · Drive: Slot · Screw head: Lens head · Ø External head: 14 mm · Number of components: 2 pcs · Thread type: M10x1.5 (standard thread) · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4.35
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Drive: Slot · Color: silver · Screw head: Hexagon · Total length: 18 mm · Thread type: M8x1.25 (standard thread) · Thread length: 12 mm · Puch OEM number: 901.1053
EUR 4.35
Polini 28 mm carburetor (hand choke)
Nominal diameter: 28 mm · Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: Flat slide valve · Choke control: Hand choke · Total length: 83 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 118 · Ø Inside entrance: 28 mm · Width: 65 mm · Ø Output inside: 28 mm · Height: 155 mm · Ø Air filter connection: 49 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 45
EUR 179.50
Collection only possible with online purchase and appointment.
