Polini CP 21 carburetor for your racing moped, moped and small motorcycle. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main throttle body: 100
Installed secondary throttle body: 40
Ø Nominal: 21 mm
Ø Air filter connection: 46 mm
Ø Intake manifold connection: 25 mm
Alternative racing carburetors, the sleeve for installation and the matching nozzles can be found in the accessories section.
Quality product from the Italian manufacturer Polini.
| Nominal diameter | 21 mm |
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Choke control | Hand choke |
| Ø fuel hose connection | 6 mm, 7 mm |
| Total length | 71 mm |
| Ø Inside entrance | 42 mm |
| Width | 66 mm |
| Ø Output inside | 22.5 mm |
| Height | 132 mm |
| Ø Air filter connection | 47 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Mounting type | Rubber sleeve |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 100 |
| Camouflaged | No |
| Size of secondary nozzle | 40 |
| Area of application | Tuning, Racing, Performance |
Accessories & related products
Polini jet set (100 - 118) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Carburetor type: CP · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 114 · Nozzle size: 116 · Nozzle size: 118
EUR 48.90
Not in stock
Polini CP 17.5 mm carburetor (hand choke)
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 17.5 mm · Carburetor type: CP · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 46 mm · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle size: 62 · Size of secondary nozzle: 40
EUR 171.50
Not in stock
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
EUR 48.90
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 26 mm · Carburetor type: Flat slide valve · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 83 mm · Width: 65 mm · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Height: 155 mm · Ø Air filter connection: 49 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Camouflaged: No · Nozzle size: 105 · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 45
EUR 177.60
Polini CP 19 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 19 mm · Area of application: Performance · Area of application: Racing · Mounting type: Rubber sleeve · Area of application: Tuning · Carburetor type: CP · Height: 132 mm · Ø Inside entrance: 42 mm · Ø Output inside: 21.8 mm · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Width: 66 mm · Vacuum connection: Yes · Total length: 71 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 90 · Size of secondary nozzle: 40
EUR 159.30
EUR 183.80
Polini CP 23 mm carburetor (cable choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 23 mm · Carburetor type: CP · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 71 mm · Width: 66 mm · Ø Inside entrance: 42 mm · Ø Output inside: 25 mm · Height: 132 mm · Ø Air filter connection: 47 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Mounting type: Rubber sleeve · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 110 · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 40
EUR 171.50
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Color: blue · Total length: 28 mm · Number of components: 3 pcs
EUR 22.00
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: galvanized (blue) · Number of components: 2 pcs · Thread type: M10x1.5 (standard thread) · Drive: Slot · Thread length: 6 mm · Screw head: Lens head · Total length: 14.6 mm · Ø External head: 14 mm · Puch OEM number: 364.1.10.660.1
EUR 4.30
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Area of application: Standard
EUR 3.45
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 12.10
EUR 26.89/l
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Nominal diameter: 47 mm · Area of application: Tuning · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Outlet type: slanted · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No · Camouflaged: No · Number of fixing points: 4 pcs
EUR 257.30
Collection only possible with online purchase and appointment.
