Polini CP 19 carburetor for your racing moped, moped and small motorcycle with the highest demands. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main jet: 90
Installed secondary jet: 40
Ø Nominal: 19 mm
Ø Air filter connection: 46 mm
Ø Intake manifold connection: 25 mm
Alternative racing carburetors, the sleeve for installation and the matching nozzles can be found in the accessories section.
Quality product from the Italian manufacturer Polini.
| Nominal diameter | 19 mm |
| Manufacturer | Polini |
| Camouflaged | No |
| Material | Aluminum |
| Area of application | Tuning, Racing, Performance |
| Component group Carburetor | Carburetor complete |
| Total length | 71 mm |
| Carburetor type | CP |
| Width | 66 mm |
| Height | 132 mm |
| Ø Inside entrance | 42 mm |
| Ø Output inside | 21.8 mm |
| Ø Air filter connection | 47 mm |
| Ø fuel hose connection | 6 mm, 7 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 90 |
| Size of secondary nozzle | 40 |
| Mounting type | Rubber sleeve |
Accessories & related products
Polini CP 17.5 mm carburetor (hand choke)
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: CP · Nominal diameter: 17.5 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 62 · Size of secondary nozzle: 40 · Area of application: Tuning
EUR 172.20
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Drive: External hexagon · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 49.10
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
EUR 49.10
Not in stock
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Nominal diameter: 26 mm · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Height: 155 mm · Ø Air filter connection: 49 mm · Width: 65 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 105 · Size of secondary nozzle: 45 · Total length: 83 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 178.30
Polini CP 15 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Rubber sleeve · Carburetor type: CP · Nominal diameter: 15 mm · Ø Inside entrance: 42 mm · Ø Output inside: 21 mm · Height: 132 mm · Ø Air filter connection: 47 mm · Width: 66 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 70 · Size of secondary nozzle: 36 · Total length: 71 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 166.00
Polini CP 17.5 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Rubber sleeve · Carburetor type: CP · Nominal diameter: 17.5 mm · Ø Inside entrance: 42 mm · Ø Output inside: 21.5 mm · Height: 132 mm · Ø Air filter connection: 47 mm · Width: 66 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 80 · Size of secondary nozzle: 36 · Total length: 71 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 172.20
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Surface: galvanized (blue) · Number of components: 1 pcs
EUR 2.95
Inox
Hot
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Color: Chrome · Ø mirror surface: 107 mm · Total length: 360 mm · Surface: chrome-plated · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread size: M8 · Thread type: M8x1.25 (standard thread)
EUR 34.30
Dell'Orto 17.5 mm PHBG carburetor cable choke
Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: PHBG · Nominal diameter: 17.5 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Height: 130 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Width: 75 mm · Ø fuel hose connection: 6 mm · Choke control: Cable choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 82 · Size of secondary nozzle: 55 · Area of application: Tuning
EUR 153.70
Not in stock
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Drive: External hexagon · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 49.10
Bumm mirror round Inox black
Mirror property: none · Manufacturer: Bumm · Material: Steel · Test mark: none · Color: black-matt · Ø mirror surface: 98 mm · Total length: 350 mm · Surface: varnished · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread size: M8 · Thread type: M8x1.25 (standard thread)
EUR 36.80
Working late? Evening hours on Thursday until 20:00
