
Lying fuel tap with pull mechanism and 90° rear-facing connection piece for your MBK / Motobécane 50, 88 or Peugeot 101, 102 moped / moped.
The installation position can be selected individually, for non-specific use.
This fuel tap with integrated hose connection is made entirely of aluminum and the filter is made of plastic.
The two seals are included in the scope of delivery.
| Manufacturer | OMG |
| Mounting type | Screws |
| Outer width | 18 mm |
| Material | Aluminum |
| Possible lever positions | open / closed |
| Material lever | Plastic |
| Filter type | Grille |
| Thread type | MF8x1 (fine pitch thread) |
| Ø fuel hose connection | 6 mm |
| Installation direction | horizontal / horizontal |
| Outlet direction | at the back |
| MBK / Motobécane |
| Peugeot |
Accessories & related products
OMG fuel filter metal 6 mm (removable)
Ø inside: 3.45 mm · Manufacturer: OMG · Material: Glass · Material: Metal · Color: gray · Color: transparent · Color: white · Ø outside: 22 mm · Filter type: Plastic net · demountable: Yes · Total length: 40 mm · Total length: 63 mm · Ø fuel hose connection: 5.6 mm · Ø fuel hose connection: 6 mm
EUR 8.35
Petrol filter large 6 / 8 mm orange
Ø inside: 4.2 mm · Material: Paper · Material: Plastic · Color: transparent · Color: white · Color: yellow · Ø outside: 38 mm · Filter type: Filter paper · demountable: No · Total length: 49 mm · Total length: 108 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 8 mm
EUR 6.00
Explore categories from Gasoline & Tank
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Screw head: Hexagon · Ø Bundle: 6 mm · Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Width across flats: 7 mm · Ø outside: 8 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Drive: Slot · Area of application: Standard · Total length: 15 mm · Thread length: 7 mm
EUR 3.05
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Racing · Area of application: Tuning · Color: black · Carburetor type: PHBG CS · Nominal diameter: 19 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Total length: 82 mm · Width: 70 mm · Height: 124 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Camouflaged: No · Size of secondary nozzle: 45
EUR 147.60
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard · Number of components: 1 pcs
EUR 2.95
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 2.95






