Radial shaft seal 20x35x7 mm for use on the crankshaft of your Puch moped / moped with ZA50 engine.
This shaft seal (colloquially known as a radial shaft seal) made from nitrile rubber is temperature-resistant up to 100°C.
Ø inner: 20 mm
Ø outer: 35 mm
Width: 7 mm
Material: NBR
Temperature-resistant: approx. -30 to +100 °C, briefly up to 120 °C
Type: AS - With rubberized outer casing, a sealing lip and a dust lip.
| Shaft seal type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Manufacturer | Puch |
| Material | NBR |
| Surface | rubberized |
| Place of use | Crankshaft |
| Ø outside | 35 mm |
| Ø inside | 20 mm |
| Width | 7 mm |
| Temperature resistance (min.) | -30 - 100 °C |
| Puch | ZA50 (air-cooled) ZA50 (fan-cooled) |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.10
EUR 2’710.00/l
Oil seal NBR 20/35/7 A DUO crankshaft | Puch ZA50
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Ø inside: 20 mm · Ø outside: 35 mm · Width: 7 mm
EUR 9.75
Moped fans also bought
NSK E20 shoulder ball bearing
Bearing cage: Brass cage ball-guided · Stock number: E20 · Inner ring width: 12 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Material: Brass · Surface: blank · Bearing type: Deep groove ball bearing · Width: 12 mm · Ø outside: 47 mm · Ø inside: 20 mm · Ball bearing closed: No
EUR 30.80
NSK L17 shoulder ball bearing
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: L17 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Material: Brass · Material: Steel · Surface: blank / oiled · Ø inside: 17 mm · Width: 10 mm · Ball bearing closed: No · Ø outside: 40 mm · Area of application: Standard
EUR 24.10
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Place of use: Crankshaft · Width: 7 mm · Ø outside: 35 mm · Temperature resistance (min.): -30 - 100 °C
EUR 9.75
Oil seal NBR 20/35/7 A DUO crankshaft | Puch ZA50
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Ø inside: 20 mm · Ø outside: 35 mm · Width: 7 mm
EUR 9.75
Oil seal NBR 17/35/7 A DUO crankshaft | Puch Z50
Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Place of use: Crankshaft · Width: 7 mm · Ø outside: 35 mm · Temperature resistance (min.): -30 - 100 °C
EUR 9.15
Collection only possible with online purchase and appointment.
