Shaft seal ring 17x28x7 mm for use on the transmission shaft of your Puch moped / moped with Z50 engine.
This shaft seal ring (colloquially known as oil seal) is mounted on the transmission shaft of the Z50 engine.
Ø
| Simmering type | A DUO - With rubberized outer casing / two sealing lips. |
| Manufacturer | Puch |
| Material | NBR |
| Surface | rubberized |
| Ø inside | 17 mm |
| Ø outside | 28 mm |
| Width | 7 mm |
| Temperature resistance (min.) | -30 - 100 °C |
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Ratings
Accessories & related products
Oil seal NBR 17/28/7 AS Pinion shaft | Puch Z50
Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Place of use: Pinion shaft · Surface: rubberized · Ø inside: 17 mm · Ø outside: 28 mm · Temperature resistance (min.): -30 - 100 °C · Width: 7 mm · Area of application: Standard
EUR 6.00
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.90
EUR 2’690.00/l
Loctite 638 Joining shaft-hub high-strength 10 ml
Temperature resistance (min.): -75 - 150 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Color: green · Adhesion: high-strength · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m · Area of application: Chemistry
EUR 26.90
EUR 2’690.00/l
Moped fans also bought
NSK L17 shoulder ball bearing
Stock number: L17 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Material: Brass · Material: Steel · Bearing type: Shoulder bearing · Surface: blank / oiled · Ø inside: 17 mm · Ø outside: 40 mm · Ball bearing closed: No · Width: 10 mm · Area of application: Standard
EUR 24.00
Oil seal NBR 17/35/7 A DUO crankshaft | Puch Z50
Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Width: 7 mm · Manufacturer: Puch · Ø inside: 17 mm · Ø outside: 35 mm · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C
EUR 9.10
Collection only possible with online purchase and appointment.
