Special needle sleeve, which was installed on some engines with the corresponding gearwheel. The freewheel sleeve is pressed into the fit of the gearwheel of the first gear.
Can be used on Sachs 503 AB / AC / ADV / ABL automatic engines.
Attention: For the installation of this needle sleeve, the gear must have an inner diameter of 25 mm (there are different versions).
Ø inner: 19 mm
Ø outer: 25.5 mm
Height: 25.3 mm
Type: HCB 121616
Quality product from the Japanese manufacturer NSK.
Details
| Manufacturer | NSK |
| Material | Steel, Sheet metal (steel), Plastic |
| Stock number | HCB 121616 |
| Height | 25.3 mm |
| Ø inside | 19 mm |
| Ø outside | 25.5 mm |
Suitable for the following models
| Sachs | 503 - ABL, AB, AC, ADV |
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002
EUR 10.70
EUR 12.00
EUR 23.78/l
Oil seal NBR 15/30/7 B AS | Sachs 503, 50/2
Temperature resistance (min.): -30 - 100 °C · Simmering type: B - With sheet metal outer casing / one sealing lip. · Ø inside: 15 mm · Ø outside: 30 mm · Width: 7 mm · Manufacturer: Sachs · Material: NBR · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 6.55
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Surface: blank · Stock number: BO15 · Bearing type: Shoulder bearing · Width: 10 mm · Ø inside: 15 mm · Ball bearing closed: No · Ø outside: 40 mm · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 30.10
NSK 6201 ball bearing 12/32/10
Bearing type: Shoulder bearing · Stock number: 6201 · Ø inside: 12 mm · Ø outside: 32 mm · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Area of application: Standard
EUR 10.30
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.35 mm · Number of components: 1 pcs · Total length: 200 mm · Width: 130 mm · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
EUR 6.55
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Width: 5.5 mm · Temperature resistance (min.): -30 - 100 °C · Ø inside: 15 mm · Ø outside: 30 mm · Pony OEM number: A5602 · Sachs OEM no.: 0230 111 100
EUR 9.55
Collection only possible with online purchase and appointment.
