High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Color | black |
| Total length | 175 mm |
| Ø mounting hole | 6 mm |
| Thread length | 6 mm |
| Width | 108 mm |
| Thread type | M5x0.8 (standard thread) |
| Height | 11 mm |
| Mounting type | Nuts & bolts |
| Hole spacing | 50 mm |
| Number of fixing points | 9 pcs, 2 pcs |
Accessories & related products
Plastic license plate holder (CH version)
Height: 11 mm · Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Thread type: M5x0.8 (standard thread) · Total length: 175 mm · Width: 108 mm · Mounting type: Nuts & bolts · Ø mounting hole: 6 mm · Hole spacing: 50 mm · Thread length: 6 mm · Number of fixing points: 9 pcs
EUR 9.75
Serrated lock washer M4 - M12 galvanized
Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0.40
Screw M8x16 cylinder head low hexagon socket, galvanized
Material: Steel · Surface: galvanized (blue) · Screw head: Cylinder head · Thread length: 16 mm · Drive: Hexagon socket · Width across flats: 5 mm · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread) · Strength class: 8.8
EUR 1.75
M6x22 hexagon head screw, galvanized
Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 26 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats: 10 mm · Thread length: 22 mm · Strength class: 8.8 · Number of components: 1 pcs · Area of application: Standard
EUR 1.35
Screw M5x12 pan-head cross galvanized
Material: Steel · Surface: galvanized (blue) · Screw head: Lens head · Ø External head: 10 mm · Total length: 16 mm · Thread length: 12 mm · Drive: Cross recess · Shank: No · Nominal diameter (thread): 5 mm · Thread type: M5x0.8 (standard thread) · Strength class: 4.8
EUR 1.25
Screw M5x10 pan-head hexagon socket, galvanized
Material: Steel · Surface: galvanized (blue) · Screw head: Lens head · Ø External head: 9.5 mm · Total length: 13 mm · Thread length: 10 mm · Drive: Hexagon socket · Shank: No · Width across flats: 3 mm · Nominal diameter (thread): 5 mm · Thread type: M5x0.8 (standard thread) · Strength class: 10.9
EUR 1.10
Explore categories from Number holder
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.20
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.45
Hot
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
EUR 24.50
Working late? Evening hours on Thursday until 20:00
