Drain nipple for automatic intake E50 engines of Puch Maxi S and N mopeds/mopeds.
Drainage of the clutch cover is usually prescribed in racing. An oil-resistant fuel hose can also be fitted to the bleeding nipple with an outer diameter of 6 mm.
The engine must be equipped with a pull starter, as the starting mechanism can no longer be installed.
A selection of oil lines, pull starters and other add-on parts such as fastening screws, sealant, gasket, oil filler screw, etc. can be found in the accessories section.
Picture 3 & 4 serves to illustrate the assembly, the clutch cover is not included in the scope of delivery.
Details
| Manufacturer | MBR |
| Material | Aluminum |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Surface: chrome-plated · Surface: raw · Ø outside: 130 mm · Ignition system: PVL · Width: 150 mm · Height: 80 mm · Total length: 170 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
EUR 184.10
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Ø outside: 130 mm · Ignition system: BOSCH · Ignition system: DUCATI · Width: 150 mm · Height: 88 mm · Total length: 160 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
EUR 184.10
Not in stock
swiing® revival screw set for clutch cover Inox | E50
Number of components: 4 pcs · Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Thread type: M6x1 (standard thread) · Drive: Slot · Screw head: Countersunk head · Screw head: Lens head · Puch OEM number: 900.9460
EUR 9.70
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Number of components: 1 pcs · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Thickness: 0.5 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.55
swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: HPI · Color: black · Width: 135 mm · Height: 93 mm · Ø outside: 130 mm · Total length: 160 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
EUR 184.10
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: MVT Allumage · Color: black-matt · Width: 150 mm · Height: 82 mm · Ø outside: 130 mm · Total length: 170 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
EUR 184.10
Moped fans like you also bought:
Oil filler plug with sealing ring | Puch Maxi
Number of components: 2 pcs · Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Drive: Slot · Total length: 14.6 mm · Screw head: Lens head · Ø External head: 14 mm · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4.30
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Number of components: 1 pcs · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.45
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Number of components: 2 pcs · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Drive: Slot · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Total length: 6 mm · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.45
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Number of components: 1 pcs · Manufacturer: swiing® revival parts · Material: Sealing paper · Thickness: 1 mm · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 7 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 15 mm · Thread length: 19 mm · Width across flats SW: 10 mm · Strength class: 10 · Strength class: 10.9 · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 24.40
Collection only possible with online purchase and appointment.
