Puch decompressor

Here you will find decompressors for cylinders and deco spare and individual parts as well as the individual deco valve for your Puch E50, E50A, Z50, ZA50 & Velux engine, with 1- & 2-speed automatic or manual gearbox, with blower or wind cooling. These single or two-speed engines with manual or automatic shifting were installed in Puch Maxi N, S / Puch Supermaxi LG1, LG2 / Puch X30 Velux / Puch X30 NS, NL / Puch X30 NG-2AH mopeds.

swiing® revival stud bolt set M6 x 106 mm | Puch

For: Puch

10842

swiing® revival stud bolt set M6 x 106 mm | Puch

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Drive: External hexagon · Width across flats SW: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1

EUR 9.05

For: Puch

12410

Puch" decompressor hood

Manufacturer: Puch · Surface: raw · Material: Aluminum

EUR 61.20

swiing® revival stud bolt M6 x 106 mm (10.9 strength)

For: Puch · Sachs

10382

swiing® revival stud bolt M6 x 106 mm (10.9 strength)

Manufacturer: swiing® revival parts · Total length: 106 mm · Thread length: 12 mm · Thread length: 20 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Puch OEM number: 360.1.10.034.1

EUR 2.20

For: Puch

11182

Decompressor | Puch Maxi

Surface: galvanized (blue) · Puch OEM number: 349.1.10.040.0

EUR 79.60

Decompressor pin 54 mm | Puch X30 Sport, Maxi

For: Puch

15525

Decompressor pin 54 mm | Puch X30 Sport, Maxi

Manufacturer: Puch · Material: Steel

EUR 31.80

For: Universal · Puch

10124

Stud bolt M7 x 106 mm (Velux)

Total length: 106 mm · Material: Steel · Surface: galvanized (blue) · Thread length: 25 mm · Thread type: M7x1 (standard thread)

EUR 3.45

Cable nipple decompressor | Puch X30 Sport, Velux

For: Puch

15557

Cable nipple decompressor | Puch X30 Sport, Velux

EUR 8.45

Decompressor pin 60 mm | Puch X30 Sport, Velux

For: Puch

15553

Decompressor pin 60 mm | Puch X30 Sport, Velux

Manufacturer: Puch · Material: Steel · Total length: 59.4 mm

EUR 34.20

For: Puch

10770

Decompressor set with hood | Puch

Manufacturer: Puch

EUR 147.00

Rivet bolt Ø 3 x 13.5 decompressor | Puch X30 Sport, Velux

For: Puch

15555

Rivet bolt Ø 3 x 13.5 decompressor | Puch X30 Sport, Velux

Ø outside: 3 mm · Total length: 13.5 mm

EUR 4.80

swiing® revival blind screw M10x1.5 x 18 SW10 decompressor

For: Puch · Sachs

20193

swiing® revival blind screw M10x1.5 x 18 SW10 decompressor

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Drive: External hexagon · Width across flats SW: 10 mm · Total length: 18 mm · Screw head: Hexagon · Thread length: 10 mm

EUR 17.00

Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10273

Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm

Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Thread length: 4 mm

EUR 2.45

swiing® revival stud bolt set | Puch X30 Velux

For: Puch

23926

swiing® revival stud bolt set | Puch X30 Velux

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 7 mm · Thread type: M7x1 (standard thread) · Total length: 106 mm · Thread length: 25 mm · Width across flats SW: 11 mm · Drive: External hexagon

EUR 20.70

Intake manifold screw set Gilardoni italkit | Puch

For: Puch

25551

Intake manifold screw set Gilardoni italkit | Puch

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Hexagon socket · Screw head: Cylinder head · Number of components: 8 pcs

EUR 4.80

For: Universal · Puch · Sachs

24456

Copper ring 10.4/13.8/0.8 decompressor

Ø inside: 10.4 mm · Ø outside: 13.8 mm · Thickness: 0.8 mm · Material: Copper · Pony OEM number: A1138 · Sachs OEM no.: 0230 015 000

EUR 1.95

For: Universal · Puch

16315

Stud bolt M6/M7 x 105 mm

Material: Steel · Surface: galvanized (blue) · Thread length: 25 mm · Total length: 105 mm · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread)

EUR 3.45

Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS

For: Puch · Sachs · Cilo

23645

Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS

Material: Aluminum · Ø inside: 15 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total height: 2.7 mm · Total height: 9.7 mm · Thread type: M6x1 (standard thread) · Area of application: Tuning

EUR 32.50

- 10 %

GPO stud bolt special M6x106 mm galvanized (10.9 strength) | Puch

For: Puch

28027

GPO stud bolt special M6x106 mm galvanized (10.9 strength) | Puch

Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 7 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 15 mm · Thread length: 19 mm · Strength class: 10.9 · Alternative version of the Puch OEM number: 360.1.10.034.1

EUR 4.70

EUR 5.25

For: Puch

28395

Sealing cord decompressor (30 cm) Puch

Total length: 300 mm

EUR 4.80

Inox

For: Puch

16566

swiing® revival washer slotted decompressor cable Inox | Puch Maxi S / N

Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Ø inside: 3.8 mm · Nominal diameter (thread): 3 mm · Area of application: Original · Area of application: Standard · Ø outside: 12 mm · Thickness: 1.4 mm · Puch OEM number: 349.1.67.005.1

EUR 4.80

Malossi neck nut set M7 high cylinder head | Puch X30 Velux

For: Puch

25999

Malossi neck nut set M7 high cylinder head | Puch X30 Velux

Manufacturer: Malossi · Thread type: M7x1 (standard thread) · Drive: External hexagon · Height: 35 mm · Thread depth: 30 mm · Width across flats SW: 11 mm

EUR 17.00

Compression spring decompressor | Puch X30 Sport, Velux

For: Puch

15554

Compression spring decompressor | Puch X30 Sport, Velux

Spring design: Pressure spring · Ø outside: 9 mm · Total length: 18 mm

EUR 6.00

For: Puch · Tomos

26905

Gasket 0.4 mm cylinder head 45 mm

Material: Aluminum · Place of use: Cylinder head · Thickness: 0.4 mm · Ø cylinder: 45 mm · Ø screw holder: 7 mm · Area of application: Tuning

EUR 3.55

swiing® ingenious centering sleeves cylinder head (M6 stud bolt) | Puch Maxi / X30 NS, NL, N-2AH

For: Puch

28511

swiing® ingenious centering sleeves cylinder head (M6 stud bolt) | Puch Maxi / X30 NS, NL, N-2AH

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 6.25 mm · Nominal diameter inside: 6 mm · Ø outside: 7.4 mm · Total length: 15 mm

EUR 11.90

swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)

For: Universal · Puch · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

16316

swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)

Manufacturer: swiing® revival parts · Diameter: 5.9 mm · Material: Steel · Surface: galvanized (blue) · Thread length: 11 mm · Thread length: 19 mm · Total length: 38 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread)

EUR 2.45

For: Puch

15561

BZ pane decompressor X30 Sport & Velux

Thickness: 3.2 mm · Manufacturer: Puch

EUR 1.60

Spring plate decompressor | Puch X30 Sport, Velux

For: Puch

15562

Spring plate decompressor | Puch X30 Sport, Velux

Ø outside: 11.4 mm · Material: Steel

EUR 6.00

Lever decompressor | Puch X30 Sport, Velux

For: Puch

15556

Lever decompressor | Puch X30 Sport, Velux

Manufacturer: Puch · Material: Steel

EUR 12.10

Valve guide decompressor | Puch X30 Sport, Velux

For: Puch

15560

Valve guide decompressor | Puch X30 Sport, Velux

Ø outside: 16 mm · Material: Steel · Surface: galvanized (blue) · Total length: 49 mm

EUR 36.70

swiing® ingenious cylinder clamping tool

For: Universal · Puch · Sachs

32860

swiing® ingenious cylinder clamping tool

Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Number of components: 23 pcs · Height: 22 mm · Ø inside: 51.6 mm · Ø outside: 99 mm

EUR 73.40

Page 1 of 2

Our favorite manufacturers