Oldie luggage carrier with clamp for your older Piaggio Ciao P moped / moped.
The rear luggage carrier is only suitable for the old model with rigid, square seat post and rear light on the mudguard.
Mounting takes place at the original attachment points under the saddle and on the screws of the seat stays. The tool compartment remains accessible.
Total length: 500 mm
Width: 165 mm
Height: 100 mm
Fixing distance front: 60 mm
Fixing distance rear: 131 mm
Length of luggage carrier clamp: 220 mm
Matching luggage bags as well as an alternative luggage carrier can be found in the accessories section.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Width | 165 mm |
| Height | 100 mm |
| Total length | 500 mm |
| Ø mounting hole | 6.5 mm, 9 mm |
| Mounting type | Screws, Nuts & bolts |
| Hole spacing | 60 mm, 131 mm |
| Number of fixing points | 4 pcs |
| Piaggio | Ciao - P |
Accessories & related products
Luggage carrier Classic Chrome | Piaggio Ciao P
Surface: chrome-plated · Manufacturer: Made in Italy · Material: Steel · Width: 140 mm · Height: 100 mm · Color: Chrome · Total length: 575 mm · Mounting type: Nuts & bolts · Mounting type: Screws · Ø mounting hole: 6.5 mm · Hole spacing: 85 mm · Hole spacing: 135 mm · Number of fixing points: 4 pcs · Piaggio OEM number: 114151
EUR 134.70
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Width: 105 mm · Height: 5.3 mm · Total length: 145 mm · Ø mounting hole: 5 mm · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Number of fixing points: 2 pcs
EUR 13.40
Not so nice 
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Color: black · Total height: 220 mm · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Surface: varnished · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm
EUR 24.40
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SHA · Area of application: Tuning · Width: 72 mm · Choke control: Hand choke · Height: 111 mm · Color: black · Total length: 82 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 82 · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mixed oil connection: No · Vacuum connection: No
EUR 85.70
Not in stock
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Color: transparent · Color: white · Ø outside: 20 mm · demountable: No · Filter type: Plastic net · Ø inside: 3 mm · Total length: 23.4 mm · Total length: 50 mm · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm
EUR 7.10
swiing® revival air filter original gray | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Filter type: Standard sieve · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Total length: 165 mm · Width: 68 mm · Height: 52 mm · Area of application: Original · Area of application: Standard · Color: gray
EUR 55.00
Siem headlight gray | Piaggio Ciao C9, C7
Manufacturer: Siem · Test mark: none · Housing material: Plastic · Thread size: M6 · Area of application: Original · Color: gray · Color: white · Bulb holder: P26s · Mounting type: Screws · Speedometer recording: None · Switch included: Yes · Battery operated: No · Number of fixing points: 2 pcs · Piaggio OEM number: 114427
EUR 80.80
swiing® revival screw set fan cover galvanized | Piaggio Ciao, SI, Bravo, Boxer
Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Material: Steel · Area of application: Standard · Number of components: 8 pcs · Screw head: Panhead · Thread type: M5x0.8 (standard thread) · Drive: Cross recess
EUR 6.00
Collection only possible with online purchase and appointment.
