All wish lists
Carousel Image 1
Carousel Image 2
hs-retro-400px

For: Puch

32374

HS-Retro gearwheel 2nd gear 23 teeth (1A quality) | Puch X30 NS, NL

EUR 138.40

Incl. 25.5% VAT.

Product description

Second gear transmission wheel for 2-speed manual Z50 engines from Puch X30 NS, NL mopeds / mopeds.

Number of teeth: 23
Toothing: straight

You can find thrust washers and other parts in the accessories section.

Original Puch spare part number: 350.1.13. 112.1

ManufacturerHS-Retro
Ø axle17.2 mm
MaterialSteel
Ø inside17.2 mm
Toothing typestraight toothed
Ø outside45 mm
Number of teeth23 pcs
Puch OEM number350.1.13. 112.1
Puch

Z50 (X30 Sport)

Accessories & related products

Cylindrical roller Ø 3.5x7.5 mm Gearbox | Puch Z50
undefined

For: Puch

11498

Cylindrical roller Ø 3.5x7.5 mm Gearbox | Puch Z50

Manufacturer: Puch · Material: Steel · Surface: Hardened · Area of application: Standard · Diameter: 3.5 mm · Width: 7.4 mm

EUR 1.75

swiing® revival clutch & intermediate plate set (2 pcs.) | Puch Z50
undefined

For: Puch

24082

swiing® revival clutch & intermediate plate set (2 pcs.) | Puch Z50

Manufacturer: swiing® revival parts · Ø inside: 46 mm · Ø inside: 51 mm · Number of slats: 2 pcs · Ø outside: 70 mm · Ø outside: 75 mm · Thickness: 1.5 mm · Thickness: 2.5 mm

EUR 41.60

Not in stock

Nos
Thrust washer 12.5/25/1.5 NOS | Puch M50, DSV, VZV

For: Puch

27867

Thrust washer 12.5/25/1.5 NOS | Puch M50, DSV, VZV

Material: Steel · Ø inside: 12.5 mm · Surface: hardened & ground · Thickness: 1.5 mm · Ø outside: 25 mm

EUR 12.00

swiing® revival thrust washer 12.5/18/2.2 gearbox | Puch Z50
undefined

For: Puch

28148

swiing® revival thrust washer 12.5/18/2.2 gearbox | Puch Z50

Manufacturer: swiing® revival parts · Material: Steel · Ø inside: 12.5 mm · Surface: hardened & ground · Thickness: 2.25 mm · Ø outside: 18 mm

EUR 9.30

Nos
Thrust washer 12.5/18/2.75 Gearbox NOS | Puch Z50
undefined

For: Puch

28149

Thrust washer 12.5/18/2.75 Gearbox NOS | Puch Z50

Manufacturer: Puch · Material: Steel · Ø inside: 12.5 mm · Surface: hardened & ground · Thickness: 2.75 mm · Ø outside: 18 mm

EUR 9.30

swiing® revival thrust washer 12.5/18/1.6 gearbox | Puch Z50
undefined

For: Puch

30383

swiing® revival thrust washer 12.5/18/1.6 gearbox | Puch Z50

Manufacturer: swiing® revival parts · Material: Steel · Ø inside: 12.5 mm · Surface: hardened & ground · Thickness: 1.6 mm · Ø outside: 18 mm · Area of application: Standard

EUR 9.30

swiing® revival thrust washer 12.5/18/1.8 gearbox | Puch Z50
undefined

For: Puch

30384

swiing® revival thrust washer 12.5/18/1.8 gearbox | Puch Z50

Manufacturer: swiing® revival parts · Material: Steel · Ø inside: 12.5 mm · Surface: hardened & ground · Thickness: 1.8 mm · Ø outside: 18 mm · Area of application: Standard

EUR 9.30

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32368

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Recording type: Cross shot · Ø inside: 13.35 mm · Width: 8 mm · Ø outside: 43 mm · Puch OEM number: 050.1.1410

EUR 90.10

HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32371

HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Ø inside: 23.8 mm · Surface: hardened & ground · Width: 7.55 mm · Ø outside: 31.98 mm · Area of application: High End · Area of application: Original · Puch OEM number: 329.1.13.065.1

EUR 72.20

HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32372

HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Ø inside: 19.44 mm · Surface: hardened & ground · Width: 7.5 mm · Ø outside: 28.1 mm · Area of application: High End · Area of application: Original · Puch OEM number: 329.1.13.010.1

EUR 55.00

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32373

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Ø axle: 12.4 mm · Material: Steel · Toothing type: straight toothed · Ø inside: 12.4 mm · Number of teeth: 28 pcs · Ø outside: 54 mm · Puch OEM number: 350.1.13.011.1

EUR 131.10

HS-Retro pinion shaft | Puch X30 NS, NL (1A quality)
undefined

For: Puch

32375

HS-Retro pinion shaft | Puch X30 NS, NL (1A quality)

Manufacturer: HS-Retro · Material: Steel · Recording type: Interlocking · Surface: hardened & ground · Total length: 90.5 mm · Ø outside: 12.35 mm · Ø outside: 16.75 mm · Puch OEM number: 350.2.13.020.1

EUR 187.50

HS-Retro countershaft 11 / 17 teeth (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32376

HS-Retro countershaft 11 / 17 teeth (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Thread type: MF10x1 (fine pitch thread) · Toothing type: straight toothed · Number of teeth: 11 pcs · Number of teeth: 17 pcs · Total length: 99 mm · Puch OEM number: 349.1.13.201.1

EUR 204.60

Moped fans also bought

GPO clutch plates (pair) | Puch X30
undefined

For: Puch

10017

GPO clutch plates (pair) | Puch X30

Manufacturer: GPO · Area of application: Standard · Number of slats: 2 pcs

EUR 18.30

swiing® revival gasket set Z50 engine | Puch X30 NS / NL
undefined

For: Puch

10157

swiing® revival gasket set Z50 engine | Puch X30 NS / NL

Manufacturer: swiing® revival parts · Material: Sealing paper · Area of application: Standard · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44

EUR 24.40

NSK L17 shoulder ball bearing
undefined

For: Universal · Puch · Sachs

11140

NSK L17 shoulder ball bearing

Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Bearing clearance: CN (standard) · Material: Brass · Area of application: Standard · Material: Steel · Surface: blank / oiled · Ø inside: 17 mm · Bearing type: Shoulder bearing · Ø outside: 40 mm · Stock number: L17 · Width: 10 mm · Ball bearing closed: No

EUR 23.90

NSK L17 shoulder ball bearing 17/40/10 engine | Puch Z50, ZA50
undefined

For: Puch

21624

NSK L17 shoulder ball bearing 17/40/10 engine | Puch Z50, ZA50

Manufacturer: NSK · Ø inside: 17 mm · Bearing type: Shoulder bearing · Ø outside: 40 mm · Stock number: L17 · Width: 10 mm

EUR 23.90

swiing® revival shim set crankshaft L17 | Puch Z50
undefined

For: Puch

23882

swiing® revival shim set crankshaft L17 | Puch Z50

Manufacturer: swiing® revival parts · Nominal diameter inside: 17 mm · Material: Steel · Surface: blank / oiled · Ø inside: 17.1 mm · Ø outside: 23.8 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm

EUR 10.90

Nos
Thrust washer 12.5/18/2.75 Gearbox NOS | Puch Z50
undefined

For: Puch

28149

Thrust washer 12.5/18/2.75 Gearbox NOS | Puch Z50

Manufacturer: Puch · Material: Steel · Ø inside: 12.5 mm · Surface: hardened & ground · Thickness: 2.75 mm · Ø outside: 18 mm

EUR 9.30

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32368

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Recording type: Cross shot · Ø inside: 13.35 mm · Width: 8 mm · Ø outside: 43 mm · Puch OEM number: 050.1.1410

EUR 90.10

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32373

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Ø axle: 12.4 mm · Material: Steel · Toothing type: straight toothed · Ø inside: 12.4 mm · Number of teeth: 28 pcs · Ø outside: 54 mm · Puch OEM number: 350.1.13.011.1

EUR 131.10

HS-Retro pinion shaft | Puch X30 NS, NL (1A quality)
undefined

For: Puch

32375

HS-Retro pinion shaft | Puch X30 NS, NL (1A quality)

Manufacturer: HS-Retro · Material: Steel · Recording type: Interlocking · Surface: hardened & ground · Total length: 90.5 mm · Ø outside: 12.35 mm · Ø outside: 16.75 mm · Puch OEM number: 350.2.13.020.1

EUR 187.50

HS-Retro countershaft 11 / 17 teeth (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32376

HS-Retro countershaft 11 / 17 teeth (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Thread type: MF10x1 (fine pitch thread) · Toothing type: straight toothed · Number of teeth: 11 pcs · Number of teeth: 17 pcs · Total length: 99 mm · Puch OEM number: 349.1.13.201.1

EUR 204.60