A unique racing exhaust with an integrated muffler for your moped, scooter, and small motorcycle.
The exhaust is shipped without a header; this can be custom-made and welded on, and the mounting bracket is also included separately.
This tuning exhaust is characterized by its very high-quality craftsmanship and is sometimes described as one of the most powerful racing mufflers for Puch racing mopeds with small displacement.
The length of the resonator is ideal for cylinder kits between 42 and 45 mm.
This tuning muffler features visible weld seams for a distinctive look. The surface is raw and untreated. To prevent corrosion, the tuning muffler should be rubbed with oil from time to time or coated with heat-resistant paint.
Ø for flame tube: 28 mm
Total length: 830 mm
Material: Steel, raw
Handcrafted HOMOET DEMPER exhaust system from the Netherlands.
| Manufacturer | HOMOET |
| Material | Steel |
| Surface | raw |
| Ø Flame tube outside | 28 mm |
| Total length | 830 mm |
| Exhaust type | Cone / double cone |
| Mounting type | Weld |
| Flame tube attachment | Weld |
Accessories & related products
Exhaust manifold 22 mm | Sachs 503 AB (with guide bushing)
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø inside: 20 mm · Ø outside: 22 mm · Ø inside: 26 mm · Ø outside: 28 mm · Color: Chrome · Number of fixing points: 2 pcs · Total length: 440 mm · Hole spacing outlet: 50 mm · Flame tube attachment: Stud bolts & nuts
EUR 36.80
swiing® ingenious exhaust manifold 28 mm chrome | Puch X30 Velux
Ø inside: 25 mm · Ø outside: 28 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 380 mm · Mounting type: Stud bolts & nuts · Hole spacing outlet: 42 mm · Number of fixing points: 2 pcs
EUR 49.10
Hot 
swiing® ingenious gasket outlet 28 mm graphite
Ø inside: 27.4 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Place of use: Exhaust · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 9.10
Explore categories from Exhaust system
Moped fans also bought
Polini CP 19 mm carburetor (hand choke)
Nominal diameter: 19 mm · Manufacturer: Polini · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Component group Carburetor: Carburetor complete · Width: 66 mm · Carburetor type: CP · Height: 135 mm · Total length: 73.5 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Mounting type: Plug connection clamped · Ø Output inside: 19 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 66 · Size of secondary nozzle: 42
EUR 172.20
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Drive: External hexagon · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
EUR 49.10
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Total length: 110 mm · Width: 58 mm · Thread length: 10 mm · Height: 29 mm · Mounting type: Screwed clamp · Number of fixing points: 1 pcs
EUR 30.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
