Unique racing exhaust with integrated silencer for your moped, moped and small motorcycle.
The exhaust is supplied without bend, this can be individually manufactured and welded on, the mounting bracket is also supplied loose.
The tuning exhaust is characterized by its very high-quality workmanship and is sometimes referred to as one of the most powerful racing exhausts for Puch racing mopeds with small displacement.
The length of the resonance body is ideal for cylinder kits between 38 and 42 mm.
This tuning muffler has visible welding seams for an unmistakable look. The surface is raw and untreated. To prevent corrosion, the tuning muffler should be rubbed with oil from time to time or painted with heat protection paint.
Ø for flame tube: 28 mm
Total length: 830 mm
Material: Steel, raw
HOMOET DEMPER exhaust system made by hand in the Netherlands.
| Manufacturer | HOMOET |
| Material | Steel |
| Surface | raw |
| Total length | 830 mm |
| Mounting type | Weld |
| Flame tube attachment | Weld |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cone / double cone |
Ratings
Accessories & related products
Flame tube 22 mm | Sachs 503 AB (with guide bush)
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 20 mm · Ø inside: 26 mm · Ø outside: 22 mm · Ø outside: 28 mm · Total length: 440 mm · Hole spacing outlet: 50 mm · Number of fixing points: 2 pcs · Flame tube attachment: Stud bolts & nuts
EUR 36.80
swiing® ingenious flame tube 28 mm chrome | Puch X30 Velux
Ø inside: 25 mm · Ø outside: 28 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 380 mm · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm · Mounting type: Stud bolts & nuts
EUR 49.00
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Area of application: Tuning · Material: Graphite / Graphite · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
EUR 9.10
Moped fans also bought
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Displacement: 65 ccm · Nominal diameter: 44 mm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 48 mm · Hole spacing inlet: 38 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 110.50
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Tuning · Number of components: 4 pcs · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing inlet: 38 mm · Decompressor: Yes
EUR 12.20
Polini CP 19 mm carburetor (hand choke)
Nominal diameter: 19 mm · Manufacturer: Polini · Width: 66 mm · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Total length: 73.5 mm · Height: 135 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Nozzle size: 66 · Size of secondary nozzle: 42
EUR 171.90
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99 · Drive: External hexagon
EUR 49.00
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Total length: 110 mm · Width: 58 mm · Thread type: M5x0.8 (standard thread) · Height: 29 mm · Number of fixing points: 1 pcs · Thread length: 10 mm · Mounting type: Screwed clamp
EUR 30.60
Collection only possible with online purchase and appointment.
