Front light made of black plastic with side tabs for routing the cable harness for Piaggio Si Mix mopeds / mopeds from 1996 onwards.
The control knob on the top has two positions.
The front light can be fitted with both conventional P26s bulbs and P26s LED bulbs (not included).
All common speedometers with a diameter of 48 mm can be installed in the front light.
Ø outside: 135 mm
Hole spacing: 115 mm
Tachometer cut-out: 48 mm
Matching bulbs, lamp grilles and alternative front lights can be found in the accessories.
Original Piaggio spare part number: 228999, 268074
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Test mark | none |
| Housing material | Plastic |
| Bulb holder | P26s |
| Color | white, black |
| Switch included | Yes |
| Ø outside | 135 mm |
| Speedometer recording | 48 mm |
| Battery operated | No |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Piaggio | Si |
Ratings
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Ø mounting hole: 6 mm · Width: 27 mm · Height: 15 mm · Total length: 50 mm · Mounting type: Screws
EUR 42.90
Hot
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 6 V · Performance: 50 W · Type of current: Alternating current (AC) · Ø mounting hole: 6 mm · Width: 27 mm · Height: 15 mm · Total length: 50 mm · Mounting type: Screws
EUR 36.80
Headlight black (2 switch positions) | Piaggio SI FL 2
Manufacturer: Made in Italy · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Switch included: Yes · Ø outside: 135 mm · Color: black · Color: white · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Battery operated: No
EUR 55.20
Headlight black (3 switch positions) | Piaggio SI FL 2
Manufacturer: Made in Italy · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Switch included: Yes · Ø outside: 135 mm · Color: black · Color: white · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Battery operated: No
EUR 55.20
Headlight gray (2 switch positions) | Piaggio SI FL 2
Manufacturer: Made in Italy · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Switch included: Yes · Ø outside: 135 mm · Color: gray · Color: white · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Battery operated: No
EUR 55.20
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Width: 105 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Total length: 145 mm · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts
EUR 13.40
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Area of application: Standard
EUR 40.40
Tail light black | Piaggio SI
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Bulb holder: Soffit pear · Tension: 6 V · Tension: 12 V · Width: 100 mm · Color: black · Color: red · Mounting type: Nuts & bolts · Number of fixing points: 1 pcs · Height: 78 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Depth: 65 mm
EUR 26.20
Collection only possible with online purchase and appointment.
