Drive pinion with 15 teeth suitable for Zündapp Belmondo mopeds, Zündapp Bergsteiger M25/M50 mopeds, as well as Alpa Spezial 3000 or Alpa Black River small motorcycles, which have a Zündapp type 247 engine installed.
Also suitable for ILO / JLO power units.
Number of teeth (A): 15
Total thickness (B=C): 4.5 mm
Mounting (D): Ø 15 x SW10
Fitting chain standard: 415
Pitch: 1/2" x 3/16"
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Chain type | 415H |
| Chain pitch | 1/2" x 3/16" |
| Manufacturer | GPO |
| Material | Steel |
| Surface | sandblasted |
| Thickness | 4.5 mm |
| Recording type | Ø15 x SW10 |
| Number of teeth | 15 pcs |
| Zündapp Belmondo | |
| ILO / JLO | |
| Zündapp | 247 Motor |
Accessories & related products
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø Pin: 4.15 mm · Ø bore: 4.2 mm
EUR 41.60
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø Pin: 4 mm · Ø bore: 4.05 mm
EUR 23.20
ESJOT chain kit | Zündapp Belmondo
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Manufacturer: GPO · Material: Steel · Pinion sizes: 11 pcs · Pinion sizes: 12 pcs · Pinion sizes: 13 pcs · Pinion sizes: 14 pcs · Sprocket sizes: 34 pcs · Sprocket sizes: 37 pcs · Sprocket sizes: 40 pcs · Sprocket sizes: 45 pcs · Sprocket sizes: 50 pcs
EUR 122.40
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Width: 50 mm · Height: 95 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 79.60
Mushroom air filter foam black, Bing SRE (Ø=20 mm)
Ø outside: 61 mm · Material: Foam · Material: Metal · Material: Rubber · Area of application: Tuning · Color: Chrome · Color: black · Filter type: Foam · Length rubber part: 65 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length of filter section: 40 mm · Ø Internal connection: 20 mm · Total length: 105 mm · Camouflaged: No
EUR 12.10
Not so nice 
15 mm intake manifold | Puch E50
Ø inside: 14.5 mm · Material: Aluminum · Area of application: Tuning · Hole spacing inlet: 38 mm · Total length: 47 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Ø External connection: 20 mm · Camouflaged: Yes · Total height: 54 mm
EUR 14.60
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Height: 55 mm · Width: 125 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Candle thread: short · Total length: 135 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 40.30
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Ø outside: 61 mm · Manufacturer: GPO · Material: Metal · Material: Rubber · Area of application: Tuning · Color: Chrome · Color: black · Filter type: Grille · Length rubber part: 63.5 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Total length: 113 mm · Camouflaged: No
EUR 15.80
Collection only possible with online purchase and appointment.
