
Complete wiring harness with a MERIT light switch already connected for your moped, scooter, and small motorcycle.
This wiring harness, equipped with all necessary cable clamps and terminal blocks, is a 1:1 replica of the original wiring harness.
The extra-long cables extend from the fork to the switch.
No adjustments are required during installation.
Cable lengths:
Fork to switch = 62 cm
; Fork to headlight = 20 cm
; Fork to engine end = 90 cm; Taillight cable length = 100 cm
Note: We recommend checking all stud bolts in the switch and on the terminal before installation and tightening them if necessary.
The cable for the horn is not included.
Good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Cable cross-section | 1.5 mm² |
| Number of cables | 5 pcs |
| Manufacturer | GPO |
| Ø Receptacle | 22 mm |
| Cable bifurcation to motor | 950 mm |
| Cable bifurcation to lamp | 240 mm |
| Cable bifurcation to switch | 600 mm |
| Tail light cable length | 1000 mm |
| Switch included | Yes |
| Luster terminal | Yes |
| Area of application | Standard |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Accessories & related products
Luster terminal 3-pole black small (0.1 - 2.5 mm²)
Cable cross-section: 0.1 - 2.5 mm · Number of connections: 6 pcs · Manufacturer: Made in Germany · Material: Brass · Material: Plastic · Material: Steel · Color: black · Number of components: 1 pcs · Clamping diameter: 3.3 mm · Total length: 18.5 mm · Width: 22 mm · Height: 15.5 mm · Area of application: Workshop accessories
EUR 1.75
GPO Wiring Harness for MERIT Light Switch
Cable cross-section: 1.5 mm² · Number of cables: 5 pcs · Manufacturer: GPO · Area of application: Standard · Cable bifurcation to motor: 950 mm · Cable bifurcation to lamp: 230 mm · Cable bifurcation to switch: 400 mm · Tail light cable length: 1000 mm · Switch included: Yes · Luster terminal: Yes · Ø Receptacle: 22 mm
EUR 49.10
Not in stock
Explore categories from Electrics & light
Moped fans also bought
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm
EUR 2.45
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Material: Steel · Color: black · Coating: none · Ø inside: 2.5 mm · Ø outside: 5 mm · Ø cable: 2.2 mm · Total length: 6000 mm · Area of application: Standard
EUR 14.70
EUR 2.45/m
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 12.20
Cable set E50 engine automatic black | Puch Maxi S / N
Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Color: black · Outer shell length: 6000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 24.00







