
10 m of purple exhaust tape for your moped, scooter, small motorcycle, and motorcycle.
With this heat-protection wrap, you’ll turn your ride into an eye-catcher. The pop of color makes your vehicle stand out from the crowd and sets it apart from the standard models.
The heat wrap reduces the temperature emitted from the exhaust system. This makes the exhaust gases themselves hotter, resulting in faster exhaust flow and lower pressure in the muffler. It also better protects other components, such as the cylinder and carburetor, from the exhaust’s heat.
The fiberglass material offers excellent thermal properties and high flexibility, which is advantageous when wrapping the manifold and exhaust.
Package contents:
10 m heat-resistant tape
, 6 stainless steel cable ties
Installation tip: Soak the entire wrap in water beforehand. Alternatively, or in addition to the stainless steel cable ties, you can also wrap the entire area of the wrap with wire.
Note: Due to the glass fiber content, it is strongly recommended that you wear gloves during installation.
Heat-resistant tape sold by the meter, alternative colors, and additional stainless steel cable ties can be found in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Fiber, Chrome steel (colloquially known as stainless steel) |
| Color | violet |
| Thickness | 1.5 mm |
| Total length | 10000 mm |
| Width | 50 mm |
| Supporter | Sigg |
| Durchführungsort | CH-8493 Saland |
Accessories & related products
GPO Heat-Resistant Tape with Fasteners, Turquoise, 5 m
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Material: Fiber · Color: turquoise · Total length: 5000 mm · Width: 50 mm · Thickness: 1.5 mm · Supporter: Sigg · Durchführungsort: CH-8493 Saland
EUR 36.80
EUR 30.20
Explore categories from Exhaust system
Moped fans also bought
Nut M11x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut 1D · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 11 mm · Height: 10 mm · Width across flats: 19 mm · Strength class: 8
EUR 3.05
GPO wheel clamp 12 mm cranked reinforced (per piece)
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Ø outside: 23.7 mm · Ø inside: 13.1 mm · Total length: 75 mm · Thread type: M6x1 (standard thread) · Thread length: 35 mm · Cranking (offset): 6 mm · Supporter: Sigg · Durchführungsort: CH-8493 Saland
EUR 3.55
EUR 3.05



