5 m of blue exhaust tape for your moped, scooter, small motorcycle, and motorcycle.
With this heat-protection tape, you’ll turn your ride into an eye-catcher. The pop of color makes your vehicle stand out from the crowd and sets it apart from the standard models.
The heat wrap reduces the temperature emitted by the exhaust system. This causes the exhaust gases themselves to become hotter, resulting in faster exhaust flow and lower pressure in the muffler. Additionally, other components such as the cylinder and carburetor are better protected from the exhaust’s waste heat.
The fiberglass material offers excellent thermal properties and high flexibility, which is advantageous when wrapping the manifold and exhaust.
Package Contents:
5 m heat protection tape
, 6 stainless steel cable ties
Installation tip: Soak the entire wrap in water beforehand. Alternatively, or in addition to the stainless steel cable ties, you can also wrap the entire area of the wrap with wire.
Note: Due to the glass fiber content, it is strongly recommended that you wear gloves during installation.
Heat-resistant tape sold by the meter, alternative colors, and additional stainless steel cable ties can be found in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Fiber, Chrome steel (colloquially known as stainless steel) |
| Color | blue |
| Thickness | 1.5 mm |
| Total length | 5000 mm |
| Width | 50 mm |
| Supporter | Sigg |
| Durchführungsort | CH-8493 Saland |
Accessories & related products
GPO Heat-Resistant Tape with Fasteners, Turquoise, 5 m
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Material: Fiber · Color: turquoise · Total length: 5000 mm · Width: 50 mm · Thickness: 1.5 mm · Supporter: Sigg · Durchführungsort: CH-8493 Saland
EUR 36.80
EUR 30.20
GPO Heat-Resistant Tape with Fasteners, Yellow, 5 m
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Material: Fiber · Total length: 5000 mm · Color: yellow · Width: 50 mm · Thickness: 1.5 mm · Supporter: Sigg · Durchführungsort: CH-8493 Saland
EUR 36.80
EUR 30.20
Explore categories from Exhaust system
Moped fans also bought
Hot 
Union Plastic Pedals "Original"
Manufacturer: Union · Material: Plastic · Material: Steel · Color: black · Surface: rubberized · Width: 77 mm · Height: 29 mm · Drive: Hexagon socket · Drive: Outer edge · Total length: 129 mm · Width across flats: 15 mm · Reflectors: Yes · Thread type: FG14.3 (9/16" 20G)
EUR 15.90
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm
EUR 15.90
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 33 mm · Width: 7 mm · Manufacturer: Sachs · Material: NBR · Place of use: Crankshaft
EUR 10.90
NSK 6201 ball bearing 12/32/10
Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Bearing type: Shoulder bearing · Width: 10 mm · Ø outside: 32 mm · Ø inside: 12 mm · Area of application: Standard
EUR 10.50
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Width: 3.5 mm · Manufacturer: Sachs · Material: NBR · Place of use: Pinion shaft · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 9.25
Power1 air filter foam straight Ø 20 / 28 mm
Manufacturer: Power1 · Camouflaged: No · Color: blue · Filter type: Foam · Total length: 118 mm · Length rubber part: 18 mm · Length of filter section: 100 mm · Ø Internal connection: 20 mm · Ø Internal connection: 28 mm · Ø outside: 50 mm · Ø outside: 70 mm · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 27.00
Working late? Evening hours on Thursday until 20:00
