Dark gray, faithful reproduction of the starter lever for Dell'Orto SHA type 3 carburetors on your Piaggio Ciao moped / moped with left-hand starter choke.
Note: Combined with the matching choke plate and the additionally required fastening clip, you can also install this choke lever on the older Ciao SC and P models.
You can find the above-mentioned fastening clip and hand choke lever on the carburetor as well as alternative choke rods in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Piaggio spare part number: 188772, 297837
| Manufacturer | GPO |
| Material | Steel, Plastic |
| Component group Carburetor | Choke control |
| Surface | galvanized (blue) |
| Carburetor type | SHA (Piaggio) |
| Choke control | Hand choke |
| Ø outside | 4 mm |
| Total length | 92 mm |
| Height | 21.5 mm |
| Width | 16 mm |
| Alternative version of the Piaggio OEM number | 188772, 297837 |
| Piaggio | Ciao - PX, C24 |
Ratings
Accessories & related products
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24. Bravo, SUPERbravo
Nominal diameter: 13 mm · Material: Aluminum · Color: black · Total length: 46 mm · Height: 96 mm · Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Width: 60 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Area of application: Tuning · Mixed oil connection: No · Vacuum connection: No · Camouflaged: No
EUR 74.20
Dell'Orto 12/7 carburetor hand choke original | Piaggio Ciao PX
Nominal diameter: 12 mm · Total length: 45 mm · Height: 97 mm · Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Width: 60 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 36 · Ø Inside entrance: 7 mm · Ø Internal connection: 16 mm · Ø Output inside: 12 mm · Ø Air filter connection: 50.8 mm · Area of application: Original
EUR 80.40
Not in stock
GPO Choke lever Dell'Orto SHA Type 3 black | Piaggio Ciao PX, C24
Manufacturer: GPO · Component group Carburetor: Choke control · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Carburetor type: SHA (Piaggio) · Total length: 92 mm · Choke control: Hand choke · Width: 16 mm · Ø outside: 4 mm · Height: 21.5 mm · Piaggio OEM number: 188772 · Piaggio OEM number: 297837
EUR 24.70
GPO Choke lever Dell'Orto SHA Type 3 red | Piaggio Ciao PX, C24
Manufacturer: GPO · Material: Plastic · Material: Steel · Component group Carburetor: Choke control · Surface: galvanized (blue) · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Ø outside: 4 mm · Width: 16 mm · Height: 21.5 mm · Total length: 92 mm · Piaggio OEM number: 188772 · Piaggio OEM number: 297837
EUR 24.70
GPO Choke lever Dell'Orto SHA Type 3 gray | Piaggio Ciao PX, C24
Manufacturer: GPO · Material: Plastic · Material: Steel · Component group Carburetor: Choke control · Surface: galvanized (blue) · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Ø outside: 4 mm · Width: 16 mm · Height: 21.5 mm · Total length: 92 mm · Piaggio OEM number: 188772 · Piaggio OEM number: 297837
EUR 24.70
GPO Choke lever Dell'Orto SHA Type 3 white | Piaggio Ciao PX, C24
Manufacturer: GPO · Material: Plastic · Material: Steel · Component group Carburetor: Choke control · Surface: galvanized (blue) · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Ø outside: 4 mm · Width: 16 mm · Height: 21.5 mm · Total length: 92 mm · Piaggio OEM number: 188772 · Piaggio OEM number: 297837
EUR 24.70
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard · Number of components: 7 pcs · Decompressor: Yes
EUR 12.30
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.30
swiing® revival stud bolt set M6 x 106 | Puch
Material: Steel · Total length: 106 mm · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Diameter: 5.9 mm · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 9.15
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 12.30
Collection only possible with online purchase and appointment.
