Slotted Ø 80x18 mm brake pads with return springs for front and rear drum brakes on your moped, moped and small motorcycle.
Slotted brake pads enable improved heat and brake dust release, resulting in an increased braking effect. This improved braking power is suitable for daily use, especially with slightly increased performance.
The pad compound corresponds to the AKOA alternative sold on the market. The quality is okay and the brakes fulfill their purpose, but do not reach the level of the swiing® brake pads in terms of braking performance and durability.
Note: These brake shoes are not suitable for bicycle riders.
Alternative brake pads with an even higher quality pad compound for racing applications, suitable springs and appropriate cleaning agents and lubricants can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Slotted | Yes |
| Manufacturer | GPO |
| Springs included | Yes |
| Number of springs | 2 pcs |
| Ø drum | 80 mm |
| Width | 18 mm |
| Area of application | Tuning |
Accessories & related products
Moped fans like you also bought:
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Color: gray · Ø Pin: 3.94 mm
EUR 13.80
EUR 15.40
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Number of components: 1 pcs · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.45
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.20
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Bearing type: Plain bearing · Ø Bundle: 24.1 mm · Total length: 19 mm · Color: black · Ø inside: 16.2 mm · Ø outside: 20.2 mm · Puch OEM number: 349.1.42.005.1
EUR 3.05
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
EUR 12.20
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Stock number: 6001 · Bearing type: Deep groove ball bearing · Width: 8 mm · Ø inside: 12 mm · Ø outside: 28 mm · Ball bearing closed: Yes · Area of application: Standard
EUR 7.25
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm
EUR 12.20
Collection only possible with online purchase and appointment.
