Original reproduction air filter for your Puch Maxi S / N moped / moped with standard Bing or swiing® SRE carburetor.
The complete air filter box is supplied pre-assembled. As usual from the factory, it has already been carefully sealed by hand with a silicone joint around the seam to minimize the risk of air leakage and make it easier to adjust the carburettor.
The complete air filter set includes the two housings, the mounting brackets, the air filter hose, the two air filter plugs and the original filter screen installed in the air filter.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Puch spare part number: 349.1.15.070.0, 349.3.15.070.0, 349.6.15.070.0
| Manufacturer | GPO |
| Area of application | Original, Standard |
| Color | black |
| Filter type | Standard sieve |
| Ø Internal connection | 20 mm |
| Mounting type | Plug connection clamped |
| Puch | E50 |
Accessories & related products
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Area of application: Chemistry · Color: black · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
EUR 24.50
EUR 350.00/l
swiing® ingenious 17 mm carburetor set camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nominal diameter: 17 mm · Area of application: Racing · Area of application: Tuning · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m
EUR 221.40
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Total length: 135 mm · Width: 125 mm · Candle thread: short · Height: 55 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Decompressor: No
EUR 40.50
Exhaust 22 mm 2-piece replica (with number) | Puch
Color: Chrome · Ø outside: 58 mm · Total length: 920 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
EUR 79.90
Hot
swiing® revival 12 mm carburetor "original" | Puch
Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: gray · Carburetor type: SRE · Nominal diameter: 12 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 65 mm · Width: 50 mm · Height: 108 mm · Area of application: Standard · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 86.00
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Aluminum · Ø inside: 12 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 45.5 mm · Area of application: Original
EUR 43.00
Hot
swiing® revival 38 mm cylinder kit 1.6 hp CH12 "original" | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 19 mm · Ø Inlet inside: 9 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Standard · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 159.90
Not in stock
Hot
swiing® revival nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 11 pcs · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
EUR 27.00
swiing® revival 50 ccm 1.6 hp cylinder set "original" | Puch E50
Nominal diameter: 38 mm · Manufacturer: GPO · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Number of fixing points: 4 pcs · Outlet type: straight · Decompressor: No
EUR 430.60
Not in stock
Working late? Evening hours on Thursday until 20:00
