Racing kit with 45 mm diameter for your Tomos moped / moped with A35 engine.
This 70 cc racing cylinder made of aluminum with Nikasil coating has every last millimeter of common sense taken out of it to make you and your Tomos the king of the racetrack.
In order to get the full power out of the tuning cylinder, a racing exhaust and a carburettor with plenty of oomph should be fitted.
All necessary gaskets, piston pins, piston rings and circlips are included in the scope of delivery.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Camouflaged | No |
| Area of application | Tuning |
| Material | Aluminum |
| Displacement | 70 ccm |
| Nominal diameter | 45 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 47.7 mm |
| Surface | sandblasted |
| Ø outlet inside | 22.9 mm |
| Hole spacing inlet | 36 mm, 39 mm |
| Inlet window | 29.8 x 36.7 |
| Thread inlet | M5x0.8 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Hole spacing outlet | 42 mm |
| Outlet type | slanted |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | No |
| Tomos |
Accessories & related products
Airsal 44 mm cylinder kit tuning 12 mm KoBo | Tomos A35
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Nominal diameter: 44 mm · Ø cylinder neck: 47.4 mm · Inlet window: 29.5 x 37.5 · Thread inlet: M5x0.8 (standard thread) · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole spacing inlet: 31.5 mm · Hole spacing inlet: 36 mm · Hole spacing inlet: 39 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Decompressor: No · Camouflaged: No
EUR 147.00
Airsal 44 mm cylinder kit tuning 10 mm KoBo | Tomos A35
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Nominal diameter: 44 mm · Ø cylinder neck: 47.4 mm · Inlet window: 29.5 x 37.5 · Thread inlet: M5x0.8 (standard thread) · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 10 mm · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole spacing inlet: 31.5 mm · Hole spacing inlet: 36 mm · Hole spacing inlet: 39 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Decompressor: No · Camouflaged: No
EUR 147.00
GPO gasket set 45 mm cylinder & diaphragm | Tomos A3, A35
Manufacturer: GPO · Material: Aluminum · Material: Composite materials · Material: Oiled paper · Area of application: Tuning · Number of components: 5 pcs · Ø cylinder: 45 mm · Hole pattern [mm]: 44 x 44 mm / 39 x 36/32 mm · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 12.10
GPO 44 mm cylinder kit tuning 12 mm KoBo | Tomos A35
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Nominal diameter: 44 mm · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 47.8 mm · Surface: sandblasted · Ø outlet inside: 22.8 mm · Hole spacing inlet: 36 mm · Hole spacing inlet: 39 mm · Inlet window: 35.5 x 29.5 · Thread inlet: M5x0.8 (standard thread) · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Outlet type: slanted · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Decompressor: No
EUR 110.20
Parmakit 45 mm cylinder kit tuning 12 mm KoBo | Tomos A35
Surface: sandblasted · Nominal diameter: 45 mm · Manufacturer: Parmakit · Camouflaged: No · Material: Aluminum · Displacement: 70 ccm · Area of application: Tuning · Crankshaft stroke: 43 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs
EUR 306.30
Piston 45 mm (12 mm KoBo) | Tomos A3 / A35
Nominal diameter: 45 mm · Ø outside piston (A): 44.94 mm · Compression height (C): 22 mm · Curvature (D): 4 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Piston weight: 91 g
EUR 42.80
Moped fans also bought
NTN 6203 C3 Ball bearing 17/40/12
Surface: blank · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6203 · Inner ring width: 12 mm · Manufacturer: NTN · Bearing clearance: C3 · Groove ring: No · Material: Steel · Ø outside: 40 mm · Bearing type: Deep groove ball bearing · Area of application: Standard · Width: 12 mm · Ø inside: 17 mm · Ball bearing closed: No
EUR 10.90
GPO mushroom air filter grille chrome 28 - 32 mm
Manufacturer: GPO · Camouflaged: No · Material: Metal · Material: Rubber · Ø outside: 61 mm · Area of application: Tuning · Color: Chrome · Filter type: Grille · Color: black · Total length: 115 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length rubber part: 65 mm · Length of filter section: 50 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm
EUR 15.80
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Nominal diameter: 15 mm · Carburetor type: SHA · Width: 70 mm · Choke control: Hand choke · Height: 100 mm · Total length: 82 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 68 · Ø Inside entrance: 15 mm · Ø Internal connection: 18 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 59 mm · Mixed oil connection: No · Vacuum connection: No
EUR 85.70
Handlebar fork plate 13 cm Cross black
Material: Steel · Color: black · Width: 665 mm · Ø outside: 22 mm · Height: 130 mm · Fork plate holder length: 100 mm · Surface: varnished · Mounting type: Fork plate · Clamping diameter: 22 mm · Length handlebar ends: 180 mm · Crossbar: Yes · Ø inside (C): 12.5 mm · Total length over ends: 230 mm
EUR 30.50
Collection only possible with online purchase and appointment.
