Racing kit with 44 mm diameter for your Tomos moped / moped with A35 engine.
This 65 cc racing cylinder made of aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) impresses with its good workmanship and long service life.
In order to get the full power out of the tuning cylinder, a racing exhaust and a carburetor with plenty of oomph should be fitted.
All necessary gaskets, piston pins, piston rings and circlips are included in the scope of delivery.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Camouflaged | No |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 65 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 44 mm |
| Ø cylinder neck | 47.8 mm |
| Ø outlet inside | 22.8 mm |
| Hole spacing inlet | 36 mm, 39 mm |
| Inlet window | 35.5 x 29.5 |
| Hole pattern [mm] | 44 x 44 |
| Thread inlet | M5x0.8 (standard thread) |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Ø piston pin (B) | 12 mm |
| Outlet type | slanted |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | No |
| Tomos |
Ratings
Accessories & related products
GPO piston 44 mm (12 mm KoBo) | Tomos A3/A35
Nominal diameter: 44 mm · Manufacturer: GPO · Ø outside piston (A): 43.96 mm · Compression height (C): 21.9 mm · Curvature (D): 4.15 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm
EUR 45.30
Explore categories from Cylinder
Moped fans also bought
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA · Nominal diameter: 16 mm · Total length: 82 mm · Mounting type: Plug connection clamped · Width: 72 mm · Ø without reducing sleeve: 21 mm · Height: 111 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Area of application: Tuning · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø Internal connection: 19 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 82
EUR 83.60
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Quantity: 10 pcs · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
EUR 25.00
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Quantity: 10 pcs · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 25.00
DMP 44 mm cylinder head (higher compression) | Tomos
Total length: 145 mm · Manufacturer: DMP · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Surface: glass bead blasted · Ø cylinder: 44 mm · Width: 145 mm · Height: 66 mm · Ø screw holder: 8 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44
EUR 71.60
Collection only possible with online purchase and appointment.
