Special plastic felt holder designed to fit your Piaggio Ciao, Si, Bravo, Boxer moped, as well as other models equipped with a Piaggio engine featuring a breaker ignition system.
The grease felt holder is installed in place of the internal capacitor and serves as the ideal complement if you’re using an external capacitor. The felt is inserted into the slot of the holder and stays securely in place thanks to the claws.
Note: The slot for the felt is a bit tight. Therefore, compress the felt slightly beforehand using pliers or a vise to make installation easier.
You can find an external condenser and other ignition parts in the accessories section.
| Mounting type | Screws |
| Ø mounting hole | 2.8 mm |
| Total height | 12.5 mm |
| Area of application | Standard |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Hot 
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Capacity: 0.26 µF · Area of application: Original · Area of application: Standard · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Height: 26 mm · Ø mounting hole: 4.4 mm · Total height: 31 mm · Piaggio OEM number: 102939
EUR 14.70
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Area of application: Original · Area of application: Standard · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Height: 26 mm · Ø mounting hole: 4.4 mm · Total height: 31 mm · Piaggio OEM number: 102939
EUR 14.70
swiing® revival screw set ignition galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Number of components: 14 pcs · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Slot · Screw head: Cylinder head · Screw head: Panhead · Area of application: Standard
EUR 9.75
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 18 mm · Height: 27 mm · Manufacturer: EFFE · Capacity: 0.28 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.5 mm · Area of application: Standard · Piaggio OEM number: 114471
EUR 29.40
Normio M3x8 Cylinder Head Slotted Screw, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Color: silver · Drive: Slot · Screw head: Cylinder head · Ø External head: 5.5 mm · Total length: 9.7 mm · Nominal diameter (thread): 3 mm · Thread type: M3x0.5 (standard thread) · Strength class: 4.8 · Thread length: 8 mm · Piaggio OEM number: P.838 · Piaggio OEM number: 00838
EUR 1.10
Moped fans also bought
Normio M3x8 Cylinder Head Slotted Screw, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Color: silver · Drive: Slot · Screw head: Cylinder head · Ø External head: 5.5 mm · Total length: 9.7 mm · Nominal diameter (thread): 3 mm · Thread type: M3x0.5 (standard thread) · Strength class: 4.8 · Thread length: 8 mm · Piaggio OEM number: P.838 · Piaggio OEM number: 00838
EUR 1.10
GPO ignition cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Copper · Material: Rubber · Color: black · Color: gray · Number of cables: 1 pcs · Tension: 6 V · Tension: 12 V · Cable length: 450 mm · Area of application: Standard · Piaggio OEM number: 149504
EUR 12.20
Not in stock
Working late? Evening hours on Thursday until 20:00
