Special side pipe exhaust for your Puch Maxi S moped / moped.
The black-painted tuning exhaust is supplied ready to fit with the required screw-on bracket.
The mounting flange is attached to a slotted hole and can therefore be ideally positioned.
Note: For mounting on your Maxi N, you must either use an additional clamp or bridge the distance with an extension brace.
Depending on the batch, the paintwork is not highly resistant to vibrations or environmental influences. It is recommended to consolidate the paintwork using heat protection paint.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Color | black |
| Total length | 860 mm |
| Surface | varnished |
| Ø outside | 60 mm |
| Number of fixing points | 3 pcs |
| Ø Flame tube outside | 28 mm |
| Ø Internal connection | 24.5 mm |
| Exhaust type | Sidepipe |
| Flame tube attachment | Stud bolts & nuts |
| Mounting type | Nuts & bolts |
| Puch | E50 |
Accessories & related products
Exhaust 18 mm replica (with number) | Puch Maxi S, N
Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Total length: 920 mm · Surface: chrome-plated · Ø Silencer: 59 mm · Number of fixing points: 4 pcs · Ø Flame tube outside: 18 mm · Exhaust type: Flute · Ø Internal connection: 14 mm · Flame tube attachment: Flange · Mounting type: Welded lug
EUR 71.30
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Total length: 920 mm · Surface: chrome-plated · Ø outside: 58 mm · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange · Mounting type: Stud bolts & nuts · Mounting type: Welded lug
EUR 79.90
66HEROES Exhaust bracket 50 mm flat Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Total length: 81 mm · Surface: electropolished · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs · Thickness: 4 mm · Hole spacing: 50 mm
EUR 14.70
66HEROES Exhaust bracket 75 mm flat Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Total length: 106 mm · Surface: electropolished · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs · Thickness: 4 mm · Hole spacing: 75 mm
EUR 15.40
66HEROES Exhaust bracket 100 mm flat Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Number of fixing points: 2 pcs · Thickness: 4 mm · Hole spacing: 100 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Total length: 130 mm
EUR 15.90
Not in stock
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Place of use: Exhaust · Thickness: 3 mm · Hole spacing outlet: 42.5 mm
EUR 9.10
Exhaust set Sidepipe Ø 28 / 60 mm chrome | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø outside: 60 mm · Total length: 600 mm · Color: Chrome · Ø Internal connection: 28 mm · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 190.60
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Ø outside: 70 mm · Exhaust type: Cigar · Flame tube attachment: Flange · Total length: 730 mm
EUR 147.60
Exhaust Boss Demper Ø 28 / 60 mm chrome
Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Ø outside: 60 mm · Ø Silencer: 60 mm · Exhaust type: Dragpipe / sharp end · Flame tube attachment: Plug connection clamped · Total length: 580 mm
EUR 122.90
Exhaust sidepipe 28 mm chrome | Puch Maxi S
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs · Ø Internal connection: 24.5 mm · Ø outside: 60 mm · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Flame tube attachment: Stud bolts & nuts · Total length: 860 mm
EUR 153.70
Explore categories from Exhaust system
Moped fans also bought
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Ø Bundle: 24.1 mm · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Total length: 19 mm · Ø inside: 16.2 mm · Ø outside: 20.2 mm · Puch OEM number: 349.1.42.005.1
EUR 3.05
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: silver · Total length: 47 mm · Total length: 60 mm · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm
EUR 15.90
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Total length: 66 mm · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 98.30
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.20
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Material: Steel · Color: black · Total length: 420 mm · Width: 170 mm · Height: 35 mm · Surface: varnished · Ø mounting hole: 8.1 mm · Ø outside: 12.5 mm · Number of fixing points: 4 pcs · Hole spacing: 410 mm · Mounting type: Screws
EUR 36.80
MKX shock absorber 26 cm black
Manufacturer: MKX · Material: Aluminum · Material: Steel · Color: black · Damping type: Spring · Total length: 295 mm · Adjustable: Yes · Surface: varnished · Ø spars: 24 mm · Ø outside: 46 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 260 mm · Mounting type: Nuts & bolts
EUR 61.40
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Color: black · Distance mudguard - center hole: 300 mm · Total length: 305 mm · Surface: varnished · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Number of fixing points: 4 pcs · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 18.30
Working late? Evening hours on Thursday until 20:00
