Cost-effective racing exhaust suitable for your Puch Maxi S / N, Puch X30 Sport NS / NL, as well as Puch X30 NG-2AH moped / moped with straight outlet.
The Bullit exhaust system provides a good performance increase for souped-up original cylinders and smaller racing cylinders.
The muffler impresses with its good workmanship. Thanks to the silver silencer and the bare steel muffler, which has been coated with clear lacquer, the resonance exhaust looks really sporty and is an absolute eye-catcher.
Ø flame tube: 28 mm
Material: steel
Surface: painted (colorless)
Further exhaust-specific material can be found in the accessories section.
A quality product made in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | varnished |
| Ø Flame tube outside | 28 mm |
| Number of fixing points | 3 pcs |
| Exhaust type | Cone / double cone |
| Mounting type | Welded lug |
| Flame tube attachment | Flange |
| Puch | E50 |
Accessories & related products
Exhaust Bullet 28 mm chrome | Puch Maxi, X30
Manufacturer: Made in Portugal · Material: Aluminum · Material: Steel · Color: Chrome · Surface: chrome-plated · Color: silver · Ø outside: 75 mm · Ø Internal connection: 24 mm · Ø Silencer: 60 mm · Total length: 865 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 3 pcs · Flame tube attachment: Flange
EUR 67.60
HOMOET exhaust "P6 Special" (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø outside: 88 mm · Ø Internal connection: 24 mm · Ø Silencer: 50 mm · Total length: 935 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 362.90
Hot 
swiing® ingenious gasket outlet 28 mm graphite
Material: Graphite / Graphite · Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Ø inside: 27.4 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 9.10
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 70 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Total length: 730 mm · Flame tube attachment: Flange
EUR 147.60
Explore categories from Exhaust system
Moped fans also bought
Hot
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Material: Metal · Material: Rubber · Filter type: Grille · Color: Chrome · Color: black · Ø outside: 61 mm · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Total length: 113 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Camouflaged: No · Area of application: Tuning
EUR 15.90
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 12.20
Hot
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Material: Aluminum · Manufacturer: GPO · Surface: sandblasted · Ø cylinder: 44 mm · Candle thread: short · Height: 55 mm · Total length: 135 mm · Width: 125 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 52.80
Hot
swiing® ingenious gasket outlet 28 mm graphite
Material: Graphite / Graphite · Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Ø inside: 27.4 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 9.10
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Material: Aluminum · Manufacturer: swiing® ingenious parts · Nominal diameter: 17 mm · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Height: 89 mm · Height: 109 mm · Ø fuel hose connection: 5 mm · Total length: 65 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Width: 47 mm · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.2 · Camouflaged: Yes · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 147.60
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Material: Aluminum · Manufacturer: swiing® ingenious parts · Total length: 38 mm · Ø inside: 17 mm · Hole spacing inlet: 38 mm · Total height: 53.5 mm · Height flange center hole: 42 mm · Mounting type: Stud bolts & nuts · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 55.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
