Chrome-plated 28 mm cigar exhaust with 70 mm outer diameter, which can be fitted to your Puch Maxi S/N, Puch X30 Sport NS/NL and Puch X30 NG-2A moped after a small adjustment.
Flame pipe and silencer are separate and are supplied without clamp as shown.
Notes: A 70 mm clamp (item no. 11543 or 18313) must be used to fit the Puch Maxi N.
For Puch X30 NG-2A, the spanner must be bent slightly so that it does not protrude from the rear case.
The M6 screw at the end of the pot must be checked and locked with an additional nut, otherwise the nut may loosen and the silencer insert may fall out.
A quality product made in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø outside | 70 mm |
| Ø Flame tube outside | 28 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cigar |
| Total length | 920 mm |
| Mounting type | Welded lug, Stud bolts & nuts |
| Flame tube attachment | Flange |
| Number of fixing points | 1 pcs |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Hot 
swiing® ingenious gasket outlet 28 mm graphite
Place of use: Exhaust · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Ø inside: 27.4 mm · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 9.10
Hot
swiing® ingenious exhaust clamp 28 mm heat-resistant
Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Ø inside: 25 - 28 mm · Color: Chrome · Total length: 40 mm · Width: 40 mm · Mounting type: Nuts & bolts
EUR 27.00
Explore categories from Exhaust system
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Total length: 66 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 79.90
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
EUR 122.90
Hot
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 19.60
Hot
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 52.80
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Total length: 66 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 98.30
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Mounting type: Screws · Total length: 46 mm · Camouflaged: Yes · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 43.00
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
