EL-Liq 74 from the Elring quality brand is a yellow-green, medium-strength, label-free, anaerobic sealing compound that is preferably used for force-fit connections of metallic components, such as housing and bearing covers, as well as flange connections in engine and transmission construction. It replaces all types of flange gaskets
Under exclusion of air and metallic contact with the connecting components, a temperature-resistant sealing film is formed that hardens.
Color: yellow-green
Consistency: hardening
Strength: medium strength
Temperature range: - 55 °C to 180 °C
Maximum sealing gap: 0.35 mm
Resistance to: Mineral oils (also with additives), synthetic oils, lubricants, fuels, organic solvents and coolant additives, cold and hot water
Content: 50 ml
You can find more sealants in the accessories section.
Quality product from the German manufacturer ElringKlinger.
Sicherheitsdatenblatt
Fiche de données de sécurité
Fiche technique
Safety data sheet
Produktdatenblatt
Technical data sheet
| Manufacturer | Elring |
| Contents [ml] | 50 ml |
| Color | yellow-green |
| Temperature resistance (min.) | -55 - 180 °C |
| Gap dimension (max.) | 0.35 mm |
| Area of application | Chemistry |
Accessories & related products
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Color: gray · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 24.40
EUR 348.57/l
Loctite 510 sealant 50 ml
Manufacturer: Loctite · Material: Silicone · Contents [ml]: 50 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: pink · Signal word: Attention · Temperature resistance (min.): -55 - 250 °C · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 0.25 mm
EUR 48.90
EUR 978.00/l
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 12.10
EUR 26.89/l
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Area of application: Tuning · Decompressor: Yes
EUR 12.10
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Color: gray · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 24.40
EUR 348.57/l
GPO secondary nozzle PHBG (size 30 - 62.5) of your choice
Manufacturer: GPO · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: PHBG AD · Carburetor type: PHBG AS · Carburetor type: PHBG BD · Carburetor type: PHBG CS · Carburetor type: PHBG DS · Total length: 9.5 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 32 · Nozzle size: 35 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 62.5 · Drive: Slot
EUR 4.30
Collection only possible with online purchase and appointment.
