swiing® Wheel Axle Kits

When your wheel has play, the rest of the ride will not feel right either. A reliable wheel setup starts with the correct axle and properly matched hardware. swiing® wheel axle kits bring together the parts that belong together. Depending on the version, a kit may include the axle, bearings, spacers, washers and nuts. Each setup is matched to specific moped models, hub types and mounting positions. No more hunting down every small part separately. Unbox it, bolt it on and get rolling smoothly again.

swiing® ingenious takes wheel bearings a step further.

Smart conversion kits, modern bearing solutions and precisely matched parts bring older setups up to date. Less fiddling. More confidence that everything fits.

swiing® ingenious wheel axle with bearing conversion kit Snowflake rear wheel | Puch Maxi

For: Puch

35913

swiing® ingenious wheel axle with bearing conversion kit Snowflake rear wheel | Puch Maxi

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Total length: 185 mm · Ball bearing closed: Yes

EUR 86.00

swiing® ingenious wheel axle with bearing conversion kit Snowflake front wheel | Puch Maxi

For: Puch

35816

swiing® ingenious wheel axle with bearing conversion kit Snowflake front wheel | Puch Maxi

Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 11 mm · Total length: 154 mm · Ball bearing closed: Yes

EUR 73.70

swiing® ingenious wheel axle with bearing conversion kit cast wheel | Piaggio SI

For: Piaggio

37015

swiing® ingenious wheel axle with bearing conversion kit cast wheel | Piaggio SI

Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 11 mm · Total length: 160 mm · Ball bearing closed: Yes

EUR 73.70

swiing® ingenious wheel axle with bearing conversion kit front wheel 16" | Pony Cross 521

For: Pony / Cilo (Beta 521 & 512)

35863

swiing® ingenious wheel axle with bearing conversion kit front wheel 16" | Pony Cross 521

EUR 73.70

swiing® ingenious wheel axle with bearing conversion kit front wheel cast rim 17" | Pony GTX 521

For: Pony / Cilo (Beta 521 & 512)

35858

swiing® ingenious wheel axle with bearing conversion kit front wheel cast rim 17" | Pony GTX 521

Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Total length: 145 mm · Thread type: MF11x1 (fine pitch thread)

EUR 73.70

swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch

For: Puch

30386

swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch

Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® ingenious parts · Ball bearing closed: Yes · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Ø inside: 12 mm · Width: 34.5 mm · Height: 5.9 mm · Height: 9.9 mm · Shank length: 74.5 mm · Thread length: 40.5 mm · Thread length: 50 mm · Width across flats: 19 mm

EUR 47.90

swiing® ingenious wheel axle for bearing conversion kit front wheel | Piaggio SI

For: Piaggio

37014

swiing® ingenious wheel axle for bearing conversion kit front wheel | Piaggio SI

Thread type: MF11x1 (fine pitch thread) · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 160 mm

EUR 49.10

swiing® ingenious wheel axle conversion kit Snowflake front | Hercules Prima, Optima

For: Hercules

36537

swiing® ingenious wheel axle conversion kit Snowflake front | Hercules Prima, Optima

EUR 73.70

swiing® ingenious wheel axle for bearing conversion kit Sachs spoke hub V905 (3rd gen.)

For: Universal · Sachs

38132

swiing® ingenious wheel axle for bearing conversion kit Sachs spoke hub V905 (3rd gen.)

EUR 49.10

swiing® ingenious wheel axle for bearing conversion kit Snowflake front wheel | Hercules Prima

For: Hercules

36534

swiing® ingenious wheel axle for bearing conversion kit Snowflake front wheel | Hercules Prima

EUR 49.10

swiing® ingenious wheel axle for bearing conversion kit Snowflake rear wheel | Puch Maxi

For: Puch

35912

swiing® ingenious wheel axle for bearing conversion kit Snowflake rear wheel | Puch Maxi

Thread type: MF12x1 (fine pitch thread) · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 185 mm

EUR 49.10

swiing® ingenious wheel axle for bearing conversion kit Snowflake front wheel | Puch Maxi

For: Puch

35815

swiing® ingenious wheel axle for bearing conversion kit Snowflake front wheel | Puch Maxi

EUR 49.10

Page 1 of 3

swiing® revival is for anyone who wants to keep their moped as original as possible.

xles and mounting hardware based on the classic design keep proven technology on the road.

swiing® revival wheel axle set Grimeca wheel hub cast wheel rear | Puch

For: Puch

19629

swiing® revival wheel axle set Grimeca wheel hub cast wheel rear | Puch

Manufacturer: SKF · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 28 mm · Ø outside: 32 mm · Ø inside: 12 mm · Total length: 190 mm · Width: 8 mm · Width: 10 mm

EUR 43.00

swiing® revival wheel axle set LELEU wheel hub cast wheel rear | Puch

For: Puch

19617

swiing® revival wheel axle set LELEU wheel hub cast wheel rear | Puch

Manufacturer: SKF · Ball bearing closed: Yes · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Width: 8 mm · Width: 9 mm · Ø outside: 28 mm · Ø outside: 29 mm · Total length: 190 mm · Ø inside: 12 mm

EUR 38.00

swiing® revival wheel axle set M11 x 180 spoke rear wheel | Puch Maxi, X30

For: Puch

10663

swiing® revival wheel axle set M11 x 180 spoke rear wheel | Puch Maxi, X30

Thread type: MF11x1 (fine pitch thread) · Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 180 mm · Shank length: 30 mm · Width across flats: 15 mm · Width across flats: 17 mm · Width across flats: 19 mm · Thread length: 75 mm

EUR 49.10

swiing® revival wheel axle set front wheel | Piaggio Ciao

For: Piaggio

32715

swiing® revival wheel axle set front wheel | Piaggio Ciao

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 150 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm)

EUR 43.00

swiing® revival wheel axle set front wheel | Piaggio Grillo

For: Piaggio

36485

swiing® revival wheel axle set front wheel | Piaggio Grillo

Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 160 mm · Ø shaft: 11 mm · Shank length: 30 mm · Thread length: 65 mm · Piaggio OEM number: (10)2139 · Piaggio OEM number: 114411 · Piaggio OEM number: 114413 · Piaggio OEM number: 114415 · Piaggio OEM number: 121403(a) · Piaggio OEM number: 124829 · Piaggio OEM number: 135696 · Piaggio OEM number: 135697 · Piaggio OEM number: 136019(2) · Piaggio OEM number: 265021 · Piaggio OEM number: 265071

EUR 45.40

swiing® revival wheel axle set front wheel | Piaggio SI

For: Piaggio

35834

swiing® revival wheel axle set front wheel | Piaggio SI

EUR 45.40

swiing® revival wheel axle set Snowflake front wheel | Puch Maxi

For: Puch

37858

swiing® revival wheel axle set Snowflake front wheel | Puch Maxi

Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 154 mm · Ø shaft: 11 mm

EUR 43.00

swiing® revival wheel axle set V905 wheel hub front | Sachs

For: Universal · Sachs

36858

swiing® revival wheel axle set V905 wheel hub front | Sachs

EUR 43.00

swiing® revival front wheel axle set | Pony Cross 521

For: Pony / Cilo (Beta 521 & 512)

35668

swiing® revival front wheel axle set | Pony Cross 521

EUR 43.00

swiing® revival rear wheel axle set | Pony GTX 521

For: Pony / Cilo (Beta 521 & 512)

35726

swiing® revival rear wheel axle set | Pony GTX 521

Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Total length: 175 mm · Ball bearing closed: Yes · Ø shaft: 11.95 mm · Thread type: MF12x1.25 (fine pitch thread) · Thread length: 21 mm · Shank length: 133 mm

EUR 52.80

swiing® revival rear wheel axle set | Pony Cross 521

For: Pony / Cilo (Beta 521 & 512)

35727

swiing® revival rear wheel axle set | Pony Cross 521

Ball bearing closed: Yes · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 12 mm · Thread type: MF12x1.25 (fine pitch thread) · Shank length: 159 mm · Total length: 188 mm · Diameter: 12 mm · Thread length: 19 mm · Width across flats: 19 mm

EUR 52.80

swiing® revival wheel axle set | Piaggio Boxer

For: Piaggio

37011

swiing® revival wheel axle set | Piaggio Boxer

Thread type: MF11x1 (fine pitch thread) · Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 180 mm

EUR 43.00

Page 1 of 7

Other collections

Cylinders from swiing® and GPO

When your cylinder needs replacing, it’s not the fancy sales pitch that counts. What matters is what happens inside the engine. Here you’ll find cylinders from swiing® and GPO for repairs, builds and tuning. Well-made, thoughtfully designed and ready for the workbench.

swiing® and GPO exhaust systems

Exhaust systems from swiing® and GPO add power, sound, and smoothness to your setup. For engines that run not only louder, but cleaner. An exhaust system matters more than you might think. It gives the engine breathing room, adds power to the setup, and turns noise into character. swiing and GPO fit the bill perfectly: cleanly built, with an authentic sound, and designed for engines that are meant to run not just louder, but more harmoniously.

2024-07-31_Collection_Roadtrip-Packliste

Road Trip Essentials

Your road trip is getting closer, but you're not sure if you have everything you need? Our travel professionals have kindly shared their packing lists with us for a successful trip.

Our favorite manufacturers

All