Special front wheel conversion kit with industrial bearings and a complete wheel axle, compatible with the front Grimeca Snowflake cast wheel on your Puch Maxi moped.
The benefits of this conversion kit include improved stability, reduced vibrations, and longer bearing life.
The set consists of the front wheel bearing kit with two ball bearings from SKF, the world’s leading ball bearing manufacturer, an aluminum spacer tube, and the complete axle set from the quality brand swiing® ingenious.
The plug-in axle includes all necessary washers, nuts, and spacer sleeves.
The colored markings show you where to install each part:
- red mark: hub (not shown in the picture)
- green mark: brake anchor plate
- yellow mark: Spare washer for the speedometer drive (the washer is not needed if a drive is installed)
- blue mark: fork legs
Notes:
The wheel axle set does not fit the 5-double-spoke rims that are standard in Switzerland. Figure 3 shows which rim type this product is designed for. The original speedometer drive cannot be reused. If you still want to have a speedometer installed, use the drive included in the accessories.
When you purchase this complete set, you’ll save a significant percentage off the retail price of the individual parts.
A sophisticated product from the premium brand swiing® that meets the highest standards.
Manufacturer: swiing® ingenious parts · Material: Steel, Chrome steel (colloquially known as stainless steel) · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm
Manufacturer: swiing® ingenious parts, SKF · Material: Aluminum · Surface: anodized · Ø inside: 11.25 mm · Ball bearing closed: Yes
| Thread type | MF11x1 (fine pitch thread) |
| Manufacturer | swiing® ingenious parts, SKF |
| Material | Steel, Chrome steel (colloquially known as stainless steel), Aluminum |
| Surface | galvanized (blue), anodized |
| Ø shaft | 11 mm |
| Total length | 154 mm |
| Ball bearing closed | Yes |
| Puch |
Accessories & related products
Transval speedometer drive 17" with bracket axle 11 mm (for VDO speedometer cable)
Manufacturer: Transval · Material: Aluminum · Color: gray · Place of use: left · Place of use: right · Wheel size: 17 " · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Ø mounting hole: 11 mm · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Overall width outside: 60 mm · Total height: 52 mm
EUR 34.30
Not in stock
swiing® ingenious wheel axle for bearing conversion kit Snowflake front wheel | Puch Maxi
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 154 mm · Thread type: MF11x1 (fine pitch thread)
EUR 49.10
swiing® ingenious wheel axle for bearing conversion kit Snowflake rear wheel | Puch Maxi
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 185 mm · Thread type: MF12x1 (fine pitch thread)
EUR 49.10
swiing® ingenious wheel axle with bearing conversion kit Snowflake rear wheel | Puch Maxi
Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 185 mm · Thread type: MF12x1 (fine pitch thread)
EUR 73.70
swiing® revival wheel axle set Snowflake front wheel | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm · Ø shaft: 11 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
EUR 43.00
GPO speedo drive 17" for Snowflake with swiing® bearing conversion kit | Puch Maxi
Total height: 10 mm · Manufacturer: GPO · Ø axle: 11 mm · Ø mounting hole: 11 mm · Material: Aluminum · Place of use: left · Place of use: right · Wheel size: 17 " · Ø outside: 41 mm · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Thread type: MF10x1 (fine pitch thread)
EUR 30.60
Explore categories from Hub & axle
Moped fans also bought
Transval speedometer drive 17" with bracket axle 11 mm (for VDO speedometer cable)
Manufacturer: Transval · Material: Aluminum · Color: gray · Place of use: left · Place of use: right · Wheel size: 17 " · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Ø mounting hole: 11 mm · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Overall width outside: 60 mm · Total height: 52 mm
EUR 34.30
Not in stock
swiing® ingenious wheel axle for bearing conversion kit Snowflake front wheel | Puch Maxi
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 154 mm · Thread type: MF11x1 (fine pitch thread)
EUR 49.10
swiing® ingenious wheel axle for bearing conversion kit Snowflake rear wheel | Puch Maxi
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 185 mm · Thread type: MF12x1 (fine pitch thread)
EUR 49.10
swiing® ingenious wheel axle with bearing conversion kit Snowflake rear wheel | Puch Maxi
Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 185 mm · Thread type: MF12x1 (fine pitch thread)
EUR 73.70
Working late? Evening hours on Thursday until 20:00
