Coaster hub HR 90V with sprocket 32 t. (with water damage) NOS | Puch X30 Velux Automat

swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 175 mm · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread length: 34 mm · Thread length: 45 mm

Sprocket 32 teeth (welded) NOS | Sachs HR90 hub

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Sachs · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 32 pcs · Ø inside: 90 mm · Thickness: 4.1 mm · Ø bolt circle: 107 mm

ESJOT sprocket 40 teeth | Sachs HR90 hub (welded)

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 40 pcs · Ø inside: 90 mm

swiing® ingenious brake shoes Ø 90 x 17 Racing slotted

Slotted: Yes · Manufacturer: swiing® ingenious parts · Width: 17 mm · Area of application: Racing · Springs included: Yes · Ø locating bolt: 10 mm · Color: silver · Number of springs: 1 pcs · Ø drum: 90 mm

swiing® revival revision set back pedal | Puch / Sachs / Hercules / Zündapp

Manufacturer: swiing® revival parts

Coaster hub HR 90V with sprocket 34 t. NOS | Puch X30 Velux HG

Manufacturer: Sachs · Area of application: Original · Color: silver · Thread type: MF10.5x1 (fine pitch thread) · Ø axle: 10.5 mm · Ø drum: 90 mm · Number of spoke holes: 36 pcs · Puch OEM number: 320.5.41.002.0

Brake anchor plate HR 90V not cranked Ø 90 mm rear NOS | Puch X30 Velux / Sachs

Manufacturer: Sachs · Material: Steel · Surface: varnished · Ø axle: 10.5 mm · Ø External brake pads: 98.3 mm · Ø outside: 89.3 mm · Ø bore: 10.7 mm · Ø drum: 90 mm · Puch OEM number: 320.4.41.007.2

Coaster hub with sprocket 37 T. NOS | Zündapp Belmondo / Hercules

Manufacturer: Sachs · Material: Aluminum · Area of application: Original · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Thread type: MF10.5x1 (fine pitch thread) · Ø axle: 10.5 mm · Ø bolt circle: 105.5 mm · Ø drum: 90 mm · Number of spoke holes: 36 pcs

Coaster hub with sprocket 50 t. for 17 inch NOS | Sachs 504 HG

Manufacturer: Sachs · Area of application: Original · Surface: chrome-plated · Surface: galvanized (blue) · Thread type: MF10.5x1 (fine pitch thread) · Ø axle: 10.5 mm · Ø bolt circle: 105.5 mm · Ø drum: 90 mm · Number of spoke holes: 36 pcs

swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N

Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 910 mm · Ø Silencer: 54.5 mm · Number of fixing points: 4 pcs · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Ø outside: 59 mm · Flame tube attachment: Flange

KMC drive chain 415H (reinforced) 128L

Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm · Color: gray

GPO license plate holder Inox (CH version)

Ø mounting hole: 5 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs

swiing® revival snap ring low control bearing set

Material: Spring steel · Surface: blank · Manufacturer: swiing® revival parts · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Height: 7 mm · Puch OEM number: 349.1.30.015.1 · Sachs OEM no.: P0521

Magura cable holder

Material: Brass · Manufacturer: Magura · Surface: nickel-plated · Area of application: Standard · Ø outside: 8 mm · Total length: 14.5 mm · Ø Cable bushing: 4 mm · Ø Nipple hole: 6.2 mm · Ø Bundle: 10 mm · Color: silver

Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing

Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø nipple: 3 mm · Nipple length: 5 mm · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs

Magura cable end sleeve 5 mm (1A quality)

Material: Brass · Manufacturer: Magura · Surface: nickel-plated · Area of application: Standard · Ø outside: 5.5 mm · Total length: 12 mm · Ø Cable bushing: 2.5 mm · Ø inside: 5 mm · Color: silver

Puch intake gasket original

Area of application: Original · Material: Sealing paper · Ø inside: 15 mm · Ø screw holder: 6.3 mm · Place of use: Admission · Hole spacing inlet: 32.5 - 38 mm · Thickness: 0.35 mm

Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm

Material: Brass · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø nipple: 6 mm · Nipple length: 5.5 mm · Area of application: Standard · Ø Stranded wire: 1.2 mm · Cable length: 2000 mm · Nipple shape: Barrel (transverse) · Number of components: 1 pcs