Hot 
High-quality Ø 90x17 mm brake pads with return tension spring for the front and rear drum brake on your moped, moped and small motorcycle.
The lining is slotted at an angle. This ensures better heat and brake dust dissipation, resulting in an increased braking effect. Due to their uncompromising braking power, these brake pads are primarily used in racing applications.
| Manufacturer | swiing® ingenious parts |
| Ø drum | 90 mm |
| Area of application | Racing |
| Width | 17 mm |
| Number of springs | 1 pcs |
| Color | silver |
| Springs included | Yes |
| Ø locating bolt | 10 mm |
| Slotted | Yes |
Ratings
Accessories & related products
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Total length: 41.1 - 65 mm · Ø outside: 10 mm · Thread length: 30 mm · Number of components: 3 pcs · Thread type: M6x1 (standard thread) · Width across flats: 8 mm
EUR 20.30
Explore categories from Drum brake
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Chain pitch: 1/2" x 3/16" · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.40
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Nipple length: 10 mm
EUR 2.95
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Ø inside: 25 mm · Ø outside: 36 mm · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard
EUR 9.75
EUR 8.00
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 13.40
EUR 29.78/l
swiing® revival ball bearing 14/25/6.3 coaster brake driver
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank · Stock number: K1052 · Bearing type: Ball ring · Ø inside: 14 mm · Ø outside: 25 mm · Ball bearing closed: No
EUR 8.50
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Total length: 41.1 - 65 mm · Ø outside: 10 mm · Thread length: 30 mm · Number of components: 3 pcs · Thread type: M6x1 (standard thread) · Width across flats: 8 mm
EUR 20.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
