Racing clutch for first gear, compatible with your Tomos moped equipped with an A35 or A55 engine.
Special aramid linings are mounted on steel backing plates. Compared to aluminum backing plates, steel backing plates provide better support and are therefore less prone to deformation, chipping, or delamination at the edges—especially during hard starts and high-performance setups.
The package includes three different spring strengths for the respective application.
Note: Secure the M6 countersunk screws of the racing clutch with Loctite after you’ve selected the clutch springs that match your engine. The tightening torque is 6 Nm.
A quality product from the American manufacturer Jammer Clutches.
| Manufacturer | Jammer |
| Material | Steel |
| Surface | burnished |
| Material addition | Composite materials |
| Recording type | Interlocking |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Ø inside | 12.2 mm |
| Ø outside | 84 mm |
| Thickness | 14 mm, 26.6 mm |
| Area of application | Racing |
| Alternative version of the Tomos OEM no. | 227849 |
| Tomos | A35 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Material: Spring steel · Surface: varnished · Color: red · Color: white · Color: yellow · Total length: 32.6 mm · Area of application: Tuning
EUR 36.80
Not in stock
Clutch Carbon 1st gear | Tomos Classic, Quadro, Sprint, Fun Sport'R
Ø outside: 85 mm · Thickness: 15 mm · Manufacturer: Made in Europe · Material addition: Carbon · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 1 pcs · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
EUR 196.80
Not in stock
Clutch Carbon 2nd gear | Tomos Classic, Quadro, Sprint, Fun Sport'R
Ø inside: 28.5 mm · Ø outside: 85 mm · Thickness: 15 mm · Manufacturer: Made in Europe · Area of application: Racing · Area of application: Tuning · Material addition: Carbon · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 1 pcs · Tomos OEM number: 227849
EUR 209.10
Not in stock
Explore categories from Clutch
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Color: gray · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.40
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Total length: 30 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread) · Thread length: 12 mm
EUR 2.20
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
Polini jet set (100 - 118) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 114 · Nozzle size: 116 · Nozzle size: 118
EUR 49.10
Polini intake rubber Ø 28.5 / 25 mm (PHBG, Polini CP)
Ø inside: 28.5 mm · Ø outside: 38.5 mm · Manufacturer: Polini · Total length: 37.5 mm · Material: Rubber · Ø inside 2: 25 mm · Color: black · Ø Passage: 25 mm · Ø External connection: 37 mm · Clamping diameter: 26.5 mm · Ø Connection 2 external: 37 mm
EUR 18.30
Working late? Evening hours on Thursday until 20:00
