M6x0.75 nut for adjusting screw on various Bing carburetors.
Height 3 mm
Original BING spare part manufactured in Germany in original equipment quality.
| Manufacturer | BING |
| Material | Steel |
| Surface | galvanized (blue) |
| Nut type | Hexagon nut |
| Thread type | MF6x0.75 (fine pitch thread) |
| Drive | External hexagon |
| Height | 3 mm |
| Width across flats SW | 10 mm |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
| Zündapp Belmondo | |
| Kreidler | Flory MF |
Moped fans also bought
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 6 pcs · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 19.50
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 85 ° · Ø outside: 6 mm · Height: 30 mm · Total length: 45.5 mm · Total length: 53.5 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.25
swiing® revival 80° carburetor pipe bend M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Total length: 41.5 mm · Total length: 50 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 80 ° · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm
EUR 8.45
Magura set screw M6x34 mm lock nut SW10
Slotted: No · Width across flats Screw: 8 mm · Manufacturer: Magura · Width across flats nut: 10 mm · Material: Brass · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Total length: 34 mm · Thread length: 23 mm
EUR 3.05
Collection only possible with online purchase and appointment.
