Original nozzle holder for Bing SRA & SRC carburetor.
Number: 2.17
Total length: 23.5 mm
Thread for nozzle: M3.5
Thread length for stem: 8.5 mm
Thread for stem: M6x0.75
Installed on Puch Velux X30 mopeds, carburetor version with needle (1/11/31) and on Zündapp Belmondo, among others.
Original Puch spare part number: 320.1.15.008.1
Original BING spare part manufactured in Germany in original equipment quality.
| Manufacturer | BING |
| Thread type | MF6x0.75 (fine pitch thread) |
| Thread length | 8.5 mm |
| Material | Brass |
| Component group Carburetor | Spraying |
| Carburetor type | SRA (1/11/31) Velux, SRC |
| Ø nozzle holder | 2.17 mm |
| Drive | External hexagon |
| Total length | 23.5 mm |
| Nozzle thread | M3.5x0.6 (standard thread) |
| Nozzle block | 2.17 |
| Puch | |
| Zündapp Belmondo |
Accessories & related products
Moped fans also bought
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Ø inside: 41 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 19.50
swiing® revival nozzle needle Bing SRE, 85 & 17 / 18 (one groove)
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Carburetor type: SRE · Ø outside: 2 mm · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Number of grooves (needle designation): 1 pcs · Number of notches (needle clip): 4 pcs · Total length: 36 mm
EUR 7.25
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -30 - 220 °C · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 12.10
EUR 26.89/l
Transval speedometer drive 17" with grease nipple
Place of use: left · Place of use: right · Total height: 52 mm · Manufacturer: Transval · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Color: gray · Ø mounting hole: 11 mm · Material: Aluminum · Ø outside: 41 mm · Wheel size [inch]: 17 " · 4-edge speedometer cable: 1.9 mm · Overall width outside: 60 mm
EUR 36.70
BING Intermediate washer Belleville washer Bing SRC, SSB, SSN, SSE, 85
Manufacturer: BING · Material: Steel · Component group Carburetor: Adjusting screws, float, etc. · Surface: galvanized (blue) · Carburetor type: SRC · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Ø outside: 11.2 mm · Pony OEM number: A1597 · Sachs OEM no.: 0244 109 000
EUR 3.55
Collection only possible with online purchase and appointment.
