
Complete, ready-to-install replacement engine for your Pony Cross, Cilo Cross and Pony GTX moped with Beta 521 engine and electric starter.
The engine is supplied ready to install. The following work must be carried out before commissioning:
- Fill / top up the gearbox oil (4.5 dl ATF)
- Fit the carburettor
- Fine-tune the carburettor (requires a higher level of dosing if not driven with 100% original add-on parts)
- Run-in with 4% mixed oil (approx. 500 km)
Scope of delivery as per illustrations.
Corresponding attachments such as spark plug connectors, engine oil, clutch cable, drive chain, etc. can be found in the accessories section.
Original Pony spare part number: A8000E
| Manufacturer | Pony |
| Area of application | Original |
| Material | Cast aluminum, Steel, Plastic |
| Pony / Cilo (Beta 521 & 512) | Beta 521 (engine) |
Accessories & related products
BERU spark plug connector 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
EUR 9.75
swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)
Diameter: 5.95 mm · Manufacturer: swiing® revival parts · Total length: 30 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.20
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 23.30
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 2250 mm · Area of application: Standard · Number of components: 1 pcs · Piaggio OEM number: 270460
EUR 2.95
swiing® revival nozzle set M5 (50 - 60) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Drive: Slot
EUR 28.20
Explore categories from Gearbox & housing (motor)
Moped fans also bought
BERU spark plug connector 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
EUR 9.75
swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)
Diameter: 5.95 mm · Manufacturer: swiing® revival parts · Total length: 30 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.20
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 2250 mm · Area of application: Standard · Number of components: 1 pcs · Piaggio OEM number: 270460
EUR 2.95






