Strengthening plate made of high-quality stainless steel for the three-jaw centrifugal clutch of your Puch moped / moped with E50 engine.
This precision-manufactured stabilizing plate prevents bending of the clutch shoe mounting bolts, especially on tuned engines, and thus ensures flawless operation, even under high loads.
The scope of delivery consists of the cover plate, three M4 Torx countersunk screws and three retaining rings.
Note: For mounting on original clutches, three M4 threads must first be inserted into the mounting bolts of the base plate.
An alternative reinforcement plate for the 2-jaw clutch, complete engine clutches and other individual parts can be found under accessories.
Quality product from the Austrian manufacturer A.S.P - Puch Parts.
| Manufacturer | ASP |
| Material | Chrome steel (colloquially known as stainless steel) |
| Thickness | 1.55 mm |
| Ø inside | 40 mm |
| Puch | E50 |
Ratings
Accessories & related products
ASP clutch 3-jaw "woven" Aramid | Puch E50
Ø outside: 91.5 mm · Thickness: 21.5 mm · Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Area of application: Racing · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 6 pcs
EUR 286.90
Not in stock
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Area of application: Original · Area of application: Standard
EUR 59.70
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Ø inside: 4.8 mm · Number of components: 3 pcs · Ø outside: 8.3 mm · Total length: 28 mm · Area of application: Tuning
EUR 21.40
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Width: 125 mm · Height: 55 mm · Area of application: Tuning · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.30
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Area of application: Tuning · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 11.80
swiing® revival stud bolt set M6 x 106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Diameter: 5.9 mm · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.85
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Thickness: 1 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.65
Collection only possible with online purchase and appointment.
