Extravagant custom license plate holder suitable for your Piaggio moped / moped with Swiss license plate.
The CNC-milled, black anodized license plate holder with «Piaggio» laser engraving is designed so that the license plate can be easily inserted and screwed to the number holder using the screws supplied.
Alternative number holders and various mounting pins for attaching the license plate to the wheel axle or to the bumper bolt can be found in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
| Manufacturer | 66HEROES |
| Material | Aluminum |
| Surface | anodized |
| Color | black |
| Width | 111 mm |
| Thread type | M4x0.7 (standard thread) |
| Height | 8 mm |
| Total length | 153 mm |
| Ø mounting hole | 5.2 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 50 mm |
| Thread length | 12 mm |
| Mounting type | Nuts & bolts |
| Piaggio |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Width: 58 mm · Height: 29 mm · Total length: 110 mm · Mounting type: Screwed clamp · Thread type: M5x0.8 (standard thread) · Number of fixing points: 1 pcs · Thread length: 10 mm
EUR 30.60
66HEROES Custom number frame "mofakult" black (CH version)
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Width: 111 mm · Height: 153 mm · Total length: 7 mm · Color: black · Thread type: M4x0.7 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 50 mm
EUR 49.10
66HEROES spring washer & M4 cam number holder Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M4x0.7 (standard thread) · Mounting type: Nuts & bolts · Thread length: 12 mm · Number of fixing points: 2 pcs · Ø mounting hole: 4.5 mm
EUR 16.90
Normio M4x12 Countersunk Slotted Stainless Steel Screw
Manufacturer: Normio · Total length: 12 mm · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 4 mm · Drive: Slot · Screw head: Countersunk head · Ø External head: 7.5 mm · Shank: No · Thread type: M4x0.7 (standard thread)
EUR 0.85
Explore categories from Number holder
Moped fans also bought
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.45
Hot 
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX / C24, Bravo, SUPERbravo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SHA (Piaggio) · Color: black · Width: 60 mm · Choke control: Hand choke · Height: 96 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø Internal connection: 16 mm · Total length: 46 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No
EUR 73.70
Not in stock
Hot
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Width: 95 mm · Manufacturer: Malossi · Material: Plastic · Color: black · Filter type: Foam · Total length: 31.2 mm · Ø Internal connection: 51 mm · Mounting type: Plug connection clamped · Ø outside: 53.2 mm · Height: 88.7 mm · Camouflaged: No · Area of application: Tuning
EUR 24.50
Polini air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Camouflaged: No · Material: Plastic · Color: black · Ø outside: 53 mm · Width: 98 mm · Filter type: Foam · Height: 94.7 mm · Total length: 29 mm · Ø Internal connection: 50.6 mm · Area of application: Tuning · Mounting type: Plug connection clamped
EUR 18.30
66HEROES mounting pin M6 license plate holder side stainless steel
Height: 32 mm · Ø outside: 15 mm · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Drive: External hexagon · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Width across flats: 13 mm
EUR 15.90
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Width: 58 mm · Height: 29 mm · Total length: 110 mm · Mounting type: Screwed clamp · Thread type: M5x0.8 (standard thread) · Number of fixing points: 1 pcs · Thread length: 10 mm
EUR 30.60
Working late? Evening hours on Thursday until 20:00
