Extravagant custom license plate holder suitable for all German moped & moped – number plates.
The CNC-milled, black anodized number plate holder with «mofakult» laser engraving is designed so that the number plate can simply be inserted and screwed to the frame using the screws supplied.
Alternative number holders and various mounting pins for attaching the license plate to the wheel axle or to the bumper bolt can be found in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
| Manufacturer | 66HEROES |
| Material | Aluminum |
| Color | black-matt, silver |
| Width | 116 mm |
| Height | 145 mm |
| Surface | anodized |
| Mounting type | Nuts & bolts |
| Ø mounting hole | 5.2 mm |
| Thread type | M4x0.7 (standard thread) |
| Number of fixing points | 2 pcs |
| Hole spacing | 27.5 mm |
| Thread length | 10 mm |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
66HEROES spring washer & M4 cam number holder Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Mounting type: Nuts & bolts · Thread type: M4x0.7 (standard thread) · Number of fixing points: 2 pcs · Ø mounting hole: 4.5 mm · Thread length: 12 mm
EUR 16.90
66HEROES Custom number frame "Piaggio" black (DE version)
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Width: 116 mm · Color: black-matt · Mounting type: Nuts & bolts · Height: 145 mm · Thread type: M4x0.7 (standard thread) · Number of fixing points: 2 pcs · Ø mounting hole: 5.2 mm · Hole spacing: 27.5 mm · Thread length: 10 mm
EUR 49.10
EUR 36.80
66HEROES Custom number frame "Puch" black (DE version)
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Width: 116 mm · Color: black-matt · Color: silver · Mounting type: Nuts & bolts · Height: 145 mm · Thread type: M4x0.7 (standard thread) · Number of fixing points: 2 pcs · Ø mounting hole: 5.2 mm · Hole spacing: 27.5 mm · Thread length: 10 mm
EUR 49.10
EUR 36.80
66HEROES Custom number frame "Sachs" black (DE version)
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Width: 116 mm · Color: black-matt · Color: silver · Mounting type: Nuts & bolts · Height: 145 mm · Thread type: M4x0.7 (standard thread) · Number of fixing points: 2 pcs · Ø mounting hole: 5.2 mm · Hole spacing: 27.5 mm · Thread length: 10 mm
EUR 49.10
EUR 36.80
Explore categories from Number holder
Moped fans also bought
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø inside: 17 mm · Ø outside: 33 mm
EUR 10.90
Manual indoor cable set
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 2200 mm
EUR 12.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
