Now the time has come: the original air filter box suitable for Zündapp Belmondo is available from us again.
Top workmanship.
The air filter can be completely dismantled, as can be seen in picture 2.
In order to "freshen up" the air filter a little more, the inner partition wall can be removed from the intake reduction. This increases the air supply slightly. Plastic injection molding
Details
| Camouflaged | No |
| Material | Plastic |
| Color | gray |
| Number of fixing points | 1 pcs |
| Ø inside | 10 mm |
| Mounting type | Plug connection clamped |
| Total length | 148 mm |
| Width | 146 mm |
| Height | 78 mm |
| Area of application | Standard, Tuning |
Suitable for the following models
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
17 mm Bing SRF carburetor (replica)
Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRF · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Nozzle block: 2.xx · Mounting type: Plug connection clamped · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Total length: 78 mm · Width: 64 mm · Height: 117 mm · Area of application: Tuning
EUR 78.40
17 mm carburetor set (Bing SRF replica) | Zündapp Belmondo
Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nominal diameter: 16 mm · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17 mm · Ø Air filter connection: 60 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 40 mm · Area of application: Tuning
EUR 132.70
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Manufacturer: swiing® ingenious parts · Camouflaged: No · Material: Aluminum · Ø External connection: 23 mm · Total length: 35 mm · Number of fixing points: 2 pcs · Ø inside: 16 mm · Total height: 42 mm · Height flange center hole: 35 mm · Mounting type: Screws · Hole spacing inlet: 40 mm · Area of application: Tuning
EUR 48.20
Moped fans like you also bought:
swiing® revival gasket outlet | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Graphite / Graphite · Place of use: Outlet · Number of fixing points: 2 pcs · Ø inside: 25 mm · Hole spacing: 40 mm · Ø outside: 38.3 mm · Thickness: 1.5 mm · Ø mounting hole: 7.1 mm · Total length: 53 mm
EUR 4.70
Fuel tap vertical M10x1 (to screw in) outgoing at the bottom / cast iron
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF10x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: screw in (thread)
EUR 18.00
ESJOT sprocket 34 teeth coaster brake galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 34 pcs · Number of fixing points: 4 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 74 mm · Ø inside: 94 mm · Thickness: 4.1 mm · Ø mounting hole: 6.4 mm
EUR 57.80
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 595 mm · Scope: 950 mm · Wide mudguard profile: 70 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm · Mounting type: Nuts & bolts
EUR 96.50
swiing® ingenious flame tube 28 mm left chrome | Zündapp Belmondo
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø inside: 25 mm · Ø outside: 28 mm · Total length: 360 mm · Color: Chrome · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 40 mm
EUR 60.30
GPO exhaust cigar original Ø 28 / 55 mm | Zündapp Belmondo, Bergsteiger
Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 560 mm · Manufacturer: GPO · Ø outside: 55 mm · Mounting type: Screwed clamp · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Ø Internal connection: 28 mm
EUR 144.80
Collection only possible with online purchase and appointment.
