Adjustable oil-pressure shock absorbers in black with chrome-plated coil springs for your moped, scooter, and small motorcycle.
The spring stiffness or preload can be adjusted to five different levels using the special spring mount. The rear springs should always be secured with large U-washers to prevent the bearing sleeves from shifting when lateral forces are applied.
Length (mounting point to mounting point): 300 mm
; Outer diameter of coil spring: 52 mm
; Shaft diameter: 32 mm
; Mounting bushings: 10 mm / 12 mm
; Color: black / chrome
The package includes one pair.
Rear springs from other manufacturers, as well as washers and mounting hardware, can be found in the accessories section.
A quality product from the manufacturer YSS.
| Manufacturer | YSS |
| Material | Steel |
| Surface | varnished, chrome-plated |
| Color | black, Chrome |
| Damping type | Hydraulic (oil) |
| Adjustable | Yes |
| Ø spars | 32 mm |
| Total length | 330 mm |
| Mounting type | Nuts & bolts |
| Ø outside | 52 mm |
| Ø Fastening inside | 10 mm, 12 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 300 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Ø outside: 52 mm · Total length: 335 mm · Color: black · Ø spars: 32 mm · Adjustable: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 330 mm
EUR 159.90
IMCA shock absorber 30 cm chrome / black
Total length: 330 mm · Ø outside: 45 mm · Color: Chrome · Manufacturer: IMCA · Color: black · Material: Steel · Surface: chrome-plated · Surface: varnished · Damping type: Spring · Ø spars: 28 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Hole spacing: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 73.70
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 8 mm · Screw head: Hexagon · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 14.70
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 22.00
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
EUR 41.70
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.20
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Number of fixing points: 4 pcs · Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Height: 55 mm · Area of application: Tuning · Decompressor: No · Camouflaged: Yes
EUR 40.50
Karcoma fuel filter 24 mm plastic / paper
Manufacturer: Karcoma · Material: Paper · Material: Plastic · Color: transparent · Color: yellow · Ø outside: 24 mm · Ø inside: 4.7 mm · Filter type: Filter paper · demountable: No · Total length: 35 mm · Total length: 60 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7.3 mm
EUR 17.10
Hot
swiing® revival Pedal Crank Set, Chrome | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Crank length (center-center): 156 mm · Color: Chrome · Thread type: FG14.3 (9/16" 20G) · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Wide intake: 28 mm · Total length: 180 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
EUR 92.20
Working late? Evening hours on Thursday until 20:00
