Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The height or preload of the shock absorbers can be adjusted using the special spring mount.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting in the event of lateral forces.
The scope of delivery includes one pair.
Rear springs from other manufacturers, the matching adjustment key, washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Material | Steel, Aluminum |
| Surface | varnished |
| Damping type | Spring |
| Color | black |
| Adjustable | Yes |
| Ø spars | 30 mm |
| Ø Fastening inside | 10 mm |
| Ø outside | 49 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Hole spacing | 300 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.80
EUR 2’680.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Color: black · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Ø outside: 52 mm · Number of fixing points: 2 pcs · Hole spacing: 330 mm · Mounting type: Nuts & bolts
EUR 171.50
Moped fans also bought
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Surface: chrome-plated · Surface: varnished · Housing material: Metal · Area of application: Standard · Thread size: M6 · Lens material: Plastic · Ø outside: 130 mm · Bulb holder: BA15d · Number of fixing points: 2 pcs · Speedometer recording: None · Switch included: No · Battery operated: No · Mounting type: Screws · Depth: 80 mm · Width: 134 mm · Height: 147 mm · Color: Chrome · Color: black · Color: transparent
EUR 30.50
Not in stock
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Place of use: Frame (+ tank) · Color: black · Color: white · Material: Polyvinyl chloride (PVC) · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm
EUR 11.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.45
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Color: Chrome · Material: Chrome steel (known as Nirosta®) · Surface: polished · Folding the ends: closed folded · Wheel size [inch]: 17 " · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
EUR 42.80
Collection only possible with online purchase and appointment.
