Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 280 mm
Outer diameter of coil spring: 49 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Ø outside | 49 mm |
| Manufacturer | Xtreme |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Ø spars | 30 mm |
| Mounting type | Nuts & bolts |
| Hole spacing | 280 mm |
| Universal |
| Tomos |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.20
EUR 2’620.00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Drive: External hexagon · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs · Screw head: Hexagon
EUR 21.40
MKX shock absorber 28 cm chrome
Manufacturer: MKX · Material: Platinum · Color: Chrome · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Mounting type: Nuts & bolts · Ø outside: 46 mm · Hole spacing: 280 mm
EUR 59.70
Explore categories from Shock absorber & swingarm
Moped fans also bought
- 12 %
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm
EUR 15.00
EUR 13.00
Hot
EBR fork reinforced black | Puch
Total length: 580 mm · Manufacturer: EWC · Material: Steel · Color: Chrome · Color: black · Surface: chrome-plated · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm
EUR 158.90
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Clamping diameter: 22 mm · Fork plate holder length: 100 mm · Width: 730 mm · Ø outside: 22 mm · Mounting type: Fork plate · Length handlebar ends: 150 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 320 mm · Height: 400 mm
EUR 42.90
Handlebar fork plate 30 cm curved with strut solid black
Material: Steel · Color: black · Surface: varnished · Width: 640 mm · Clamping diameter: 22 mm · Height: 280 mm · Fork plate holder length: 80 mm · Ø outside: 22 mm · Mounting type: Fork plate · Length handlebar ends: 190 mm · Crossbar: Yes · Ø Strut: 10 mm · Strut length: 200 mm
EUR 69.20
Handlebar fork plate 15 cm cross black
Material: Steel · Color: black · Surface: varnished · Width: 710 mm · Height: 150 mm · Fork plate holder length: 100 mm · Clamping diameter: 22 mm · Mounting type: Fork plate · Length handlebar ends: 150 mm · Crossbar: Yes · Ø Strut: 12.5 mm · Ø outside: 22 mm · Strut length: 230 mm
EUR 29.80
GPO steerer tube nut M26x1 closed fork plate chrome
Drive: External hexagon · Manufacturer: GPO · Area of application: Standard · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Height: 13.8 mm · Thread depth: 12 mm · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Width across flats: 30 mm · Thread type: MF26x1 (fine pitch thread)
EUR 11.80
Collection only possible with online purchase and appointment.
