Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Total length | 290 mm |
| Ø spars | 28 mm |
| Ø outside | 44 mm |
| Ø Fastening inside | 10 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Hole spacing | 260 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 14.70
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 22.00
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Total length: 295 mm · Mounting type: Nuts & bolts · Hole spacing: 260 mm · Number of fixing points: 2 pcs
EUR 61.40
YSS Shock absorber Racing 28 cm (oil pressure)
Manufacturer: YSS · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø spars: 280 mm · Total length: 310 mm · Mounting type: Nuts & bolts · Hole spacing: 280 mm · Number of fixing points: 2 pcs
EUR 172.20
Explore categories from Shock absorber & swingarm
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Ø outside: 8 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø Bundle: 6 mm · Total length: 15 mm · Thread length: 7 mm · Width across flats: 7 mm · Area of application: Standard
EUR 3.05
swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Thread length: 12 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9
EUR 2.20
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.20
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.45
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Thread type: M5x0.8 (standard thread) · Material: Plastic · Material: Steel · Color: silver · Drive: Slot · Drive: Triangular head · Surface: galvanized (blue) · Surface: raw · Thread length: 35 mm · Total length: 47 mm · Thread length: 50 mm · Total length: 60 mm
EUR 15.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
