
Complete wiring harness with plug-in tongues for your Kreidler Flory MF 4, MP 1 moped / moped.
The wiring can of course also be used universally for all mopeds with the corresponding cable length.
This wiring harness, equipped with all cable clamps, is ready for installation and therefore only needs to be connected. No adjustments are required during installation.
Cable lengths:
Motor to lamp: 75 cm
Motor to rear light: 118 cm
Alternative cable lengths, cable clamps and other products for vehicle electrics can be found in the accessories section.
A quality product manufactured in Germany.
| Manufacturer | Made in Germany |
| Number of cables | 3 pcs |
| Switch included | No |
| Cable bifurcation to motor | 750 mm |
| Cable bifurcation to lamp | 750 mm |
| Tail light cable length | 1180 mm |
| Luster terminal | No |
| Kreidler | Flory MF |
Accessories & related products
Luster terminal 3-pole black small (0.1 - 2.5 mm²)
Cable cross-section: 0.1 - 2.5 mm · Number of connections: 6 pcs · Manufacturer: Made in Germany · Material: Brass · Material: Plastic · Material: Steel · Number of components: 1 pcs · Clamping diameter: 3.3 mm · Total length: 18.5 mm · Color: black · Width: 22 mm · Height: 15.5 mm · Area of application: Workshop accessories
EUR 1.75
swiing® revival wiring harness | Puch / Sachs
Manufacturer: swiing® revival parts · Number of cables: 5 pcs · Switch included: No · Cable bifurcation to motor: 870 mm · Cable bifurcation to lamp: 140 mm · Cable bifurcation to switch: 480 mm · Tail light cable length: 1000 mm · Luster terminal: Yes · Area of application: Standard
EUR 29.40
Protective conduit for cable Ø 5 / 10 / 15 mm (per meter) black
Ø inside: 5 mm · Ø inside: 10 mm · Ø inside: 15 mm · Ø outside: 6 mm · Ø outside: 11.5 mm · Ø outside: 16 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Total length: 1000 mm
EUR 2.95
swiing® revival wiring harness MERIT light switch
Manufacturer: swiing® revival parts · Number of cables: 5 pcs · Cable cross-section: 1.5 mm² · Switch included: Yes · Cable bifurcation to motor: 950 mm · Cable bifurcation to lamp: 230 mm · Cable bifurcation to switch: 400 mm · Tail light cable length: 1000 mm · Luster terminal: Yes · Ø Receptacle: 22 mm · Area of application: Standard
EUR 49.10
Not in stock
Explore categories from Electrics & light
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Width across flats: 7 mm · Drive: External hexagon · Drive: Slot · Thread type: M6x1 (standard thread) · Thread length: 7 mm · Area of application: Standard
EUR 3.05
Magura set screw M5x34 mm
Slotted: No · Manufacturer: Magura · Ø cable holder: 2.55 mm · Material: Brass · Surface: nickel-plated · Total length: 34 mm · Width across flats Screw: 8 mm · Ø Receptacle: 7.05 mm · Thread type: M5x0.8 (standard thread) · Width across flats nut: 8 mm · Thread length: 24 mm
EUR 3.05
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Valve type: TR6 car valve · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 "
EUR 18.30
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Chain pitch: 1/2" x 3/16" · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Color: gray · Chain lock type: Spring lock · Rolling circumference: 1448 mm · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 23.30
ESJOT sprocket 42 teeth galvanized | Kreidler MF2 / MP2
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 42 pcs · Ø inside: 94 mm · Ø bolt circle: 106 mm · Number of fixing points: 4 pcs · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs · Ø mounting hole: 6.4 mm · Cranking (offset): 8 mm
EUR 41.20







