Socket axle M12x218 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels and rear wheels. Due to the large width, it is increasingly used as a rear wheel axle. If necessary, the threaded shaft must be shortened on both sides.
The complete rear axle set is also equipped with the following parts:
- 2 pieces of M12 x 1 nuts (SW19 / 10 mm)
- 1 piece of spacer washer (Ø 24 x 2.8 mm)
- 2 pieces of bearing cone (D20 x d14 mm / SW17)
- 2 pieces of bearing shells (Ø outside: 29.3 / Ø inside: 26 mm / Ø bore: 15.5 mm / length: 9.2 mm)
- 1 piece M12 x 1 nuts (SW17 / 5 mm)
- 2 pieces dust ring (Ø outer: 29.15 mm / Ø inner: 20.5 mm / thickness: 0.4 mm)
To ensure that you can enjoy your new axle for a long time, we recommend that you order the higher-quality swiing cones in the accessories section at the same time.
You can find more axle parts in the accessories section.
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | MF12x1 (fine pitch thread) |
| Total length | 218 mm |
| Ø shaft | 12 mm |
| Shank length | 71 mm |
| Thread length | 78 mm |
| Puch |
| Sachs |
Ratings
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (colloquially known as stainless steel) · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Height: 10 mm · Strength class: A2-70
EUR 4.65
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Color: blue · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.20
EUR 2’620.00/l
66HEROES cap nut M12x1 stainless steel polished
Drive: External hexagon · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Thread type: MF12x1 (fine pitch thread) · Nut type: Cap nut · Width across flats: 17 mm · Height: 26.2 mm · Thread depth: 23.4 mm
EUR 14.20
66HEROES pointed nut "Bullit" M12x1 wheel nut Inox
Drive: External hexagon · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF12x1 (fine pitch thread) · Nut type: Pointed nut · Width across flats: 17 mm · Height: 23.5 mm · Thread depth: 16 mm
EUR 14.20
Explore categories from Hub & axle
Moped fans also bought
- 12 %
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Surface: blank / oiled · Ø bore: 4 mm
EUR 15.00
EUR 13.00
- 10 %
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.50
EUR 9.45
- 12 %
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Surface: galvanized (blue)
EUR 2.85
EUR 2.50
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (colloquially known as stainless steel) · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Height: 10 mm · Strength class: A2-70
EUR 4.65
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Strength class: 8 · Thread type: MF12x1 (fine pitch thread) · Height: 5.8 mm · Width across flats: 19 mm · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.15
FAG 16101 A 2RS wheel bearing 12/30/8
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 8 mm · Ø inside: 12 mm · Manufacturer: FAG · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Stock number: 16101 · Bearing type: Deep groove ball bearing · Width: 8 mm · Ø outside: 30 mm · Ball bearing closed: Yes · Area of application: Standard
EUR 17.60
Collection only possible with online purchase and appointment.
