Not so nice 
Socket axle M11x153 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels and rear wheels.
The complete threaded shaft set is also equipped with the following parts:
- 2 pieces of M11 x 1 nuts (SW17 / 9 mm)
- 1 piece spacer washer (Ø 20 x 1.5 mm)
- 2 pieces of bearing cone (H 13.1 mm / D18 mm / SW15.5)
- 2 pieces of bearing shells (Ø outer: 29.3 / Ø inner: 26 mm / Ø bore: 13.5 mm / length: 9.2 mm)
- 1 piece of M11 x 1 nuts (SW17 / 8 mm)
- 3 pieces M11 x 1 nuts (SW17 / 5 mm)
- 2 pieces of dust ring (Ø outside: 29.15 mm / Ø inside: 20.5 mm / thickness: 0.4 mm)
- 1 piece spacer ring (D 16.85 mm / d 11.7 mm / thickness: 5 mm)
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we can understand you, but do not grant you any warranty or exchange.
The installed cones and bearing shells are unfortunately not of convincing quality and should therefore be replaced by the swivel parts as found in the accessories section.
A high-quality alternative as well as wheel nuts and cones can be found in the accessories section.
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | MF11x1 (fine pitch thread) |
| Ø shaft | 10.3 mm |
| Total length | 153 mm |
| Thread length | 63 mm |
| Shank length | 27 mm |
| Puch |
| Sachs |
Ratings
Accessories & related products
swiing® revival nut M11x1 x 4 SW19 wheel nut galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon flat nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Height: 4 mm · Width across flats: 19 mm · Strength class: 8
EUR 3.45
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.20
EUR 2’620.00/l
66HEROES cap nut M11x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Nut type: Cap nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Height: 26.2 mm · Thread depth: 23.4 mm · Width across flats: 17 mm
EUR 14.20
swiing® ingenious wheel axle set M11x1 x 154 front wheel spokes | Puch Maxi, X30 Sport, Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Diameter: 11 mm · Total length: 154 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 57.30
Explore categories from Hub & axle
Moped fans also bought
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Ø inside: 25 mm · Ø outside: 36 mm
EUR 9.45
Collection only possible with online purchase and appointment.
