VDO foam speedometer drive NOS

Transval foam under speedometer drive

Manufacturer: Transval · Material: Foam · Color: white · Ø outside: 40 mm · Ø mounting hole: 16 mm · Pony OEM number: P9050

VDO speedometer drive 17" LH NOS

Manufacturer: VDO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Thread type: MF10x1 (fine pitch thread) · Ø outside: 38.9 mm · 4-edge speedometer cable: 1.8 mm · Ø axle: 12 mm · Overall width outside: 42.7 mm · Ø mounting hole: 12.8 mm · Speedometer recording: Bracket (for bending) · Total height: 14.3 mm · Wheel size: 17 "

VDO speedometer drive 16" LH / RH NOS

Manufacturer: VDO · Material: Plastic · Material: Steel · Thread type: MF10x1 (fine pitch thread) · Ø outside: 39 mm · 4-edge speedometer cable: 1.8 mm · Ø axle: 11 mm · Overall width outside: 45.5 mm · Ø mounting hole: 11.2 mm · Speedometer recording: Bayonet · Total height: 14.8 mm · Wheel size: 16 "

VDO speedometer drive 17" LH / RH NOS

Manufacturer: VDO · Material: Plastic · Material: Steel · Thread type: MF10x1 (fine pitch thread) · Ø outside: 39.4 mm · 4-edge speedometer cable: 1.8 mm · Ø axle: 11 mm · Overall width outside: 46 mm · Ø mounting hole: 11.2 mm · Speedometer recording: Bracket (for bending) · Total height: 14.7 mm

VDO speedometer drive 17" with grease nipple holder NOS

Manufacturer: VDO · Material: Aluminum · Thread type: MF10x1 (fine pitch thread) · Place of use: left · 4-edge speedometer cable: 1.8 mm · Ø axle: 9.5 mm · Ø mounting hole: 9.6 mm · Wheel size: 17 "

Karcoma fuel tap M12x1 vertical (with union nut) 2 connections

Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Reserve level: 50 mm

GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Ø inside: 94 mm · Color: black · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Thickness: 4.5 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Cranking (offset): 8 mm

swiing® revival stud bolt inlet/outlet M6 x 30 mm (10.9 strength)

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Thread length: 12 mm · Strength class: 10.9

Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom

Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm

Leonelli 6V voltage regulator (1A quality)

Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 6 V · Width: 27 mm · Performance: 50 W · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Mounting type: Screws · Ø mounting hole: 6 mm

Transval foam under speedometer drive

Manufacturer: Transval · Material: Foam · Color: white · Ø outside: 40 mm · Ø mounting hole: 16 mm · Pony OEM number: P9050

CIF screw set side protection | Piaggio Ciao

Manufacturer: CIF · Material: Spring steel · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Color: silver · Screw head: Lens head · Number of components: 12 pcs · Area of application: Standard

Fuse plate emblem original | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: Piaggio · Width: 8 mm · Total length: 13 mm · Clamping range: 3 - 5 mm · Piaggio OEM number: 008108