All wish lists
Carousel Image 1
Carousel Image 2
logo_puch-mk

For: Puch

12249

Torsion spring for Puch ZA50 engagement plate

Home
| Workshop & standard parts
| Standard parts
| Springs
EUR 7.25

Incl. 25.5% VAT.

Torsion spring for the back plate on 2-speed automatic ZA50 engines, which are installed on Puch X30 NG-2A mopeds.

Original spare part number: 321.1.12.646.1

Details

Spring designTorsion spring
ManufacturerPuch

Suitable for the following models

Puch

ZA50 (air-cooled)

ZA50 (fan-cooled)

Moped fans like you also bought:

swiing® revival gearbox cover gasket (new model) | Puch Z50 engine
undefined

For: Puch

10200

swiing® revival gearbox cover gasket (new model) | Puch Z50 engine

Manufacturer: swiing® revival parts · Total length: 170 mm · Material: Sealing paper · Number of components: 1 pcs · Width: 120 mm · Color: sand-colored · Number of fixing points: 7 pcs · Thickness: 0.35 mm

EUR 3.55

Starter cable in engine | Puch ZA50
undefined

For: Puch

11111

Starter cable in engine | Puch ZA50

Ø Stranded wire: 1.5 mm · Cable length: 68 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Nipple length: 8 mm · Manufacturer: Made in Austria · Puch OEM number: 910.4.18.001.0

EUR 18.30

Inox
swiing® revival steerer tube nut M26x1 open Stem Inox
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Tomos

11176

swiing® revival steerer tube nut M26x1 open Stem Inox

Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Nut type: Union nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Ø inside: 21.15 mm · Ø outside: 28.3 mm · Height: 12 mm · Thread depth: 8 mm · Width across flats SW: 30 mm

EUR 23.20

GPO sprocket 20 teeth (wide) | Puch
undefined

For: Puch

12183

GPO sprocket 20 teeth (wide) | Puch

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Surface: Hardened · Material: Steel · Recording type: Interlocking · Number of teeth: 20 pcs · Total thickness: 4.6 mm

EUR 24.40

Spring for gear wheel Puch ZA50
undefined

For: Puch

12250

Spring for gear wheel Puch ZA50

Spring design: Ironing spring · Manufacturer: Puch · Material: Spring steel · Surface: raw

EUR 9.70

Inox
MBR retaining plate oil seal on ignition side "Racing" Inox
undefined

For: Puch

15216

MBR retaining plate oil seal on ignition side "Racing" Inox

Manufacturer: MBR · Material: Chrome steel (known as Nirosta®) · Area of application: Tuning · Color: silver · Surface: brushed · Ø inside: 25.3 mm · Number of fixing points: 4 pcs · Ø outside: 89.4 mm

EUR 23.20

swiing® revival end nut fork 1" / 24G open
undefined

For: Universal · Zündapp Belmondo

15271

swiing® revival end nut fork 1" / 24G open

Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Thread type: FG25.4 (1" 24G) · Ø outside: 35 mm · Drive: External hexagon · Height: 13.7 mm · Width across flats SW: 30 mm

EUR 18.30

swiing® revival freewheel inner ring Ø 24 mm gearbox | Puch ZA50
undefined

For: Puch

15850

swiing® revival freewheel inner ring Ø 24 mm gearbox | Puch ZA50

Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Ø outside: 24.6 mm · Height: 14.5 mm · Puch OEM number: 321.1.13.651.1

EUR 22.00

swiing® revival compression spring starter clutch | Puch ZA50
undefined

For: Puch

15857

swiing® revival compression spring starter clutch | Puch ZA50

Spring design: Pressure spring · Manufacturer: swiing® revival parts · Total length: 30 mm

EUR 9.70

Inox
MBR 0.5 mm lifting plate Gilardoni italkit Inox | Puch
undefined

For: Puch

16131

MBR 0.5 mm lifting plate Gilardoni italkit Inox | Puch

Manufacturer: MBR · Material: Chrome steel (known as Nirosta®) · Place of use: Cylinder base · Thickness: 0.5 mm · Ø cylinder: 47 mm · Area of application: Tuning

EUR 12.20